Instructions / Assembly
Do Not use this appliance with an adjustable regulator. We suggest use this appliance with LPG
cylinder of 5KG. The maximum diameter and the maximum height of the cylinder is 380mm and
450mm as shown in (Fig.1).
Pay aenon when put the cylinder to the cylinder
hole, ensure the hose connect to the cylinder not
touch the hot surface. Keep the cylinder in place
during operaon. Never put spare cylinder in the same
cylinder enclosure. Never block the way of shung off
the cylinder valve.
Warning: Shut off the gas cylinder when you smell gas.
1: maximum diameter
2: maximum height
2
Fig.1
1
7
The hose assembly must be replaced prior to the appliance being put into operaon if there is evidence of
excessive abrasion or wear or if the hose is damaged. The replacement hose assembly shall be specified by
the manufacturer.
• Do not aempt to disconnect the gas cylinder or any gas fing while your appliance is in operaon.
• The propane gas supply cylinder to be used must be:
Constructed and marked in accordance with the U.S. Department of Transportaon (D.O.T) Specificaons
for LP-Gas cylinders, or the Standard for Cylinders, Spheres, and Tubes for Transportaon of Dangerous
Goods and Commission, CAN/CSA-B339, as applicable;
Provided with a listed overfilling prevenon device; and
The propane gas cylinder must be arranged for vapor withdrawal.
NEVER use a propane gas cylinder with a damaged body, cylinder valve, collar or foong.
Dented or rusted propane gas cylinder may be hazardous and should be checked by your cylinder supplier
prior to use.
The propane cylinder should NOT be dropped or handled roughly.
The propane cylinder must be stored outdoors, out of the reach of children and must NOT be stored in a
building, garage or any other enclosed area.
Do not insert any tool or foreign object into the cylinder valve outlet or safety relief valve. You may damage
the cylinder valve and cause a leak. Leaking propane may result in explosion, fire, severe personal injury or
death.
Never keep a propane cylinder in a hot car or trunk. Heat will cause the gas pressure to increase, which may
open the relief valve and allow gas to escape.
Place the dust cap on the cylinder valve outlet whenever the cylinder is not in use. Only install the type of
dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs
may result in leakage of propane.
DO NOT store a space propane cylinder under or near this appliance.
Disconnect the cylinder when the appliance is not being used.
NEVER fill the cylinder beyond 80 percent full.
Other cylinder may be acceptable for use with this appliance provided they have the same profile and
dimension to be compable with the appliance nesng hole and retenon means.