Use and Care Manual
Step 1:Connect the gas cylinder base (E) to the front panel (F) with bolts
(M).
NOTE:Please fully tighten all bolts at this time.
Step 2:Align the holes at both ends of the connecting rod (H) to the
holes of the front panel(F) and the gas cylinder base(E)
UHVSHFWLYHO\DQGWKHQIL[WKHPZLWKEROWV/
NOTE:Please fully tighten all bolts at this time.
M
E
H L
F O[
[ [
[
[
[
1/4*35
M
16
1/4*12