Use and Care Manual
Tools needed:
Page 3
Level
Flat-blade and
Phillips screw-
drivers
Powered
screwdriver
or drill
Measuring
tape
Utility knife
Marker or
pencil
Table of Contents
INSTALLATION
Tools needed....................................................3
Parts supplied...................................................4
Venting requirements.......................................5
Mount heights & clearance...........................5-6
Calculating vent system length.......................6
Venting methods & ductless conversion..........7
Charcoal lters & electrical requirements.......8
Preparation......................................................9
Installation................................................10-12
Range hood operations............................13-19
USE AND CARE
Troubleshooting...........................................20
Use and care information...............................21
Specications..............................................21
MAINTENANCE
Cleaning...............................................22
Replacing lter & light bulb....................22-24
WARRANTY
Coverage & exceptions.................................25
Disclaimer & contact information..................26