Installation Guide
Table Of Contents
- Table of Contents
- Warning
- Warning
- Warning
- Warning
- Safety and Warning Information
- Safety and Warning Information
- Safety and Warning Information
- Product Introduction
- Product Introduction
- Product Introduction
- Installation
- Operation
- Operation
- Operation
- Operation
- Operation
- Operation
- Operation
- Operation
- Maintenance
- Maintenance
- Maintenance
- Maintenance
- This symbol on the product or in its packing
Control panel
Quick
Cool
Smart
icon
icon
Quick Freeze
icon
Default
is
Fahrenheit
when
power
is
on
.
Press
"
MODE
"
button
5
seconds
,
to
switch between
°C
and
°F
.
Other
buttons
use
the
same
method
to
switch
between
two
modes
.
Set te mperature range : Celsius degree
mode
Set temperature range: Fahrenheit degree mode
Setting
the
Temperature
Control
• The first time
you
turn
the unit on, the unit will start at the factory-set default temperature, which is
41ºF(5°C) in
the refrigerator compartment and 0ºF(-18°C) in the freezer compartment.
• The
first
time you turn
the unit on, adjust
the
temperature in the refrigerator compartment to 37ºF(3°
C)and run
for at least 4 hours before placing food
inside. This will ensure
that the freezer compartment
is
thoroughly chilled and the refrigerator compartment is stabilized before food is placed inside. Then adjust
the temperature setting to your desired setting.
• To adjust
the
temperature in each zone,
press
the appropriate zone button. The temperature will
change according to the pre-set temperatures as shown below.
- 13 -
Operation
Mode control
1
.
Fridge temperature range
:
2
~
8°C
(
Default value 5°C
)
2 .Freezer temperature range: -23~-15°C (Default
value -
18°C)
1
.
Fridge temperature range
:
35
~
46°F
(
Default value