Use and Care Manual

19 20
Installing the water line
Water line installation kits are available
at extra cost from your dealer.
Connecting to the water supply line
1. First shut off the main water supply
line and turn the ice-maker off.
2. Locate the nearest cold water
drinking line.
3. After connecting the water supply
to the water valve, turn your main
water supply back on and flush
several gallons water to clear the
water supply line.
Connecting the water line to the
refrigerator
There are several items that you need
to purchase to complete this
connection.
You are find these items sold as a kit
at your local hardware store.
1.First water tubes (supplied) insert
Into corresponding hole of water
connector (supplied).
2.Second water line installation kit
(not included) inserts into another
hole of water connector (supplied).
3.Turn water on and check for any
leakage
Only connect the water line to a
drinkable water source.
If your water line is not drinkable,
please add an external water filter.
If you have to repair or disassemble
the water line, cut off the plastic
tubing to make sure you get a snug,
leak-free connection.
Installing the water line
Cold water line
Pipe clamp
Water line installation kit
Shut off walve
1
2
3
Water connector
Water tube