Specification

15
Self-cleaning panels
If the oven is equipped with self-cleaning catalytic panels, at normal cooking temperatures (430°F) the catalytic
enamel favours the transformation of splashes of fat into a light powder residue. This powder may be removed with
a damp cloth once the oven has cooled. In this way the enamel surface remains porous and ensures maximum yield
of the panels.
Fat-filter
(in selected models only)It is recommended that the fat fi lter is cleaned regularly as a build up of grease could
damage the thermostat and the fan motor.
Fig. 18: Removal of oven shelf support
Fig. 19: Removal of fat-fi lter (F)
Fig. 20: Removal of oven lamp
When the oven is out of order
In case your appliance is not working correctly, disconnect it from the mains and call the After Sales Service.
In case oven light is not working properly, disconnect the appliance from the mains, remove the protection glass of
the lamp and replace it (Fig. 20).
Take care that lamp must be suitable for working at high temperatures and has the proper technical features.
Cleaning the grills
We advise always cleaning the pan support grills after cooking. Wait until they have cooled down and then clean them
with a NON ACID detergent. Acid substances such as lemon juice or other acid detergents may cause irremediable
damage to the enamel on the grills. Dry the grills carefully with a cloth immediately after washing them. Washing in
the dishwasher not recommended.
IMPORTANT
Insert foods when the oven is hot.«Grill» baking.
When appliances are equipped with grill, baking can be achieved keeping the door closed. By using the grill you can
cook meat, fish and even vegetables. At first, we suggest using the upper runner (4). Position the selector on grill
and fix the temperature of 360˚F.
F
Figure 18 Figure 19 Figure 20