Use and Care Manual

USA-CAN - 35

FAULT POSSIBLE CAUSE TROUBLESHOOTING
The programme does
not start.
Your Dishwasher is not plugged
in.
Plug your Dishwasher in.
Your Dishwasher is not
switched on.
Switch your Dishwasher on by
󰀨
Fuse blown. Check your indoor fuses.
Water inlet tap is closed. Turn on the water inlet tap.
Your Dishwasher door is open. Close the Dishwasher door.
Water inlet hose and machine

Check the water inlet hose and

are not clogged.
Water remains inside
the machine.
Water drain hose is clogged or
twisted.
Check the drain hose, then either
clean or untwist it.
 

yet.

Machine stops during
washing.
Power failure. Check mains power.
Water inlet failure. Check water tap.
Shaking and hitting
noises are heard
during a wash
operation.
The spray arm is hitting the
dishes in the lower basket.
Move or remove items blocking the
spray arm.
Partial food wastes
remain on the dishes.
Dishes placed incorrectly,
sprayed water not reaching
󰀨
Do not overload baskets.
Dishes leaning each another.
Place dishes as instructed in the
section on loading your dishwasher.
Not enough detergent used.
Use the correct amount of detergent,
as instructed in the programme table.
Wrong wash programme
selected.
Use the information in the programme
table to select the most appropriate
programme.
Spray arms clogged with food
waste.
Clean the holes in the spray arms with
thin objects.
Filters or water drain pump


