Use and Care Manual

USA-CAN - 21


These racks are designed to increase the
capacity of top basket. You can place your
cups and glasses on these racks. Thanks
to adjustable feature of the racks, you can
󰀨
racks.
Height adjustment plastics mounted on
󰀨
positions.
You can also place long knives, forks and
spoons on these racks horizontally for them
not to block the movement of spray arms.
Top basket horizontal wire located on top
basket allows you to place your plates and
bowls where required. Also you can wash
kitchenware such as pan or pot by closing
the horizontal wire.
NOTICE: Bringing the wires
to the horizontal position
by holding them from the
tips may cause them to
bend. Therefore, it will be
appropriate to bring the wires
in the middle to horizontal or
vertical posi-tion by holding
them from their stems and
pushing.
The basket height adjustment mechanism
on the top basket of your machine is
designed to let you adjust the height of your
top basket upwards or downwards, without
removing it from your machine when it is
full, and create large spaces at the top or
bottom area of your machine as needed.
Basket of your machine is set to upper
position in factory settings. In order to raise
your basket, hold it from both sides and pull
it upwards. In order to lower it, hold it from
both sides again, and leave it. In loaded
basket adjustment mechanism, make sure
that both sides are in the same position.
(up or down)
NOTICE: Make sure that
both levers catch in the same
height position.