Energy Guide

Daisy Chainable HDBaseT™ Receiver

8.0 Windows® Manager Software GUI

The UHBX-R-XT graphical user interface (GUI) is a Windows® software

used to configure advanced settings of the UHBX-R-XT. Use of the software

requires USB connection of the PC to the device. For convenience, a USB

cable is provided with the receiver.

After configuring the receiver, the user can save the desired configuration as a

file on their PC. Configuration files can also be uploaded to receiver.

The USB port can also be used to upgrade the firmware in the UHBX-R-XT.

There is a full manual for the GUI on the website. Below are basic features.

8.1 Status page

There are two main pages in the GUI. The status page is shown above. It gives

you visual indication of how the HDBaseT input and output are working

(mode, cable length, video detection), as well as how you have configured the

box (its Address, and serial port settings). This page also allows you to

manage the EDID.

EDID

EDID mode can be set to either emulate or pass-thru.

 Emulate – In this mode, the internal default EDID is passed to the source.

 Pass-thru (Default) – This is a default mode. When set to this mode, the

EDID passed to the source comes from a sink TV, LCD monitor, or

projector connected to the receiver.

EDID can be learned from a local HDMI monitor. The

saved EDID will automatically replace the emulated

EDID.