Manual

Model SC-VGA-2B

COLOR

RED – Adjust RED RGB value. Range is 0-100%, default=47 (RGB) or 48

(YPbPr)

GREEN – Adjust GREEN RGB value. Range is 0-100%, default=47 (RGB)

or 48 (YPbPr)

BLUE – Adjust BLUE RGB value. Range is 0-100%, default=47 (RGB) or 48

(YPbPr)

EXIT – Exit COLOR Submenu

SIZE

Select this option to toggle between FULL, PANSCAN, LETTERBOX,

UNDERSCAN or OVERSCAN display modes. The change occurs as each

option is selected. Default=FULL

SOURCE

AUTO – Automatically detects the type of input video source based on the

selected resolution. Default

PC – Forces the input video source to be RGBHV

YPbPr – Forces the input video source to be YPbPr

OUTPUT

Use arrows to adjust output mode. Refer to Section 5.2 below for a list of all

available modes.

The default output resolution of the SC-VGA-2B is XGA @ 60Hz.

The unit has non-volatile memory and memorizes all your settings before

power off and recalls those settings on the next power on.

At any time, pressing the UP ARROW ▲ and MENU button together will

change the output resolution to XGA@60Hz. Pressing the MENU and DOWN

ARROW ▼ together will change the output resolution to 480P@60 Hz.