User guide

ss
VGA / HDTV Video Processor
7
sampling adjustment range. Using 5-coax extension cables (rather than
3 coax+ 4 TP) maintains the timing differential in long cable runs.
Under normal condition the unit automatically detects and shows the
input format as YPbPr or RGB. However, you can manually select the
YPbPr or RGB to match the format of your input. Selecting a format
that doesn't coincide with your input will result in an abnormal picture.
O
O
u
u
t
t
p
p
u
u
t
t
s
s
e
e
t
t
u
u
p
p
-
-
When it is selected, a sub-menu appears, that
gives you choices for the Output Mode (refresh-rate and resolution)
and Mirroring Status. use +, - button to choose your desired PC or
HDTV resolution and mirroring state. Please refer to Table 3.1 on page
7 for a list of available output Modes
P
P
i
i
c
c
t
t
u
u
r
r
e
e
A
A
d
d
j
j
u
u
s
s
t
t
-
-
When it is selected the following adjust
parameters will appear:
The factory preset values are shown above. Use + -, and MENU/Enter
to adjust the value of your selected parameter. Select reset to reset all
adjustment back to the factory preset value.
Table 3.1 – Output Modes
PC Resolutions HDTV Resolutions
SXGA 1280 X 1024@60/75Hz 720p-RGB 1280X 720@60Hz
1280A 1280 X 960@60Hz 576p-RGB 720X 576@60Hz
XGA 1024 X 768@60/70/75/85Hz 480p-RGB 720 X 480@60Hz
WXGA 1280 X 768@60Hz 720p-YPbPr 1280 X 720@60Hz
SVGA 800 X 600@60/72/75/85Hz 576p-YPbPr 720 X 576@60Hz
VGA 640 X 480@60/72/75/85Hz 480p-YPbPr 720 X 480@60Hz
VGA 70 720 X 400@70Hz 1080i-YPbPr 1920 X1080@60Hz
VESA 85 640 X 400@85Hz
1152 X 864@ 70/75Hz