User Manual

❑ Operation
130
FoamLogix 3.3 / 5.0 / 6.5 Installer / Operations Manual
p/n: 029-0021-68-0
Begin Foam Injection.
Establish water flow and press ON
button.
Change Injection Rate.
Read Injection Rate.
Press and HOLD  and  for two
(2) seconds. Release once desired
rate is set.
Press and release  or . The dis-
play shows the injection rate and
returns to the selected function
after two (2) seconds.
Read Total Water or Foam
Solution.
Press
i until LED below TOTAL FLOW
illuminates.
Operation Action Display
Figure 5-6: Normal Operation Summary Chart