User guide

NOTICE !

Hale Products, Inc. (Hale) cannot assume responsibility for product failure result-

ing from improper maintenance or operation. Hale is responsible only to the limits

stated in the product warranty. Product specifications contained in this manual are

subject to change without notice.

All Hale products are quality components -- ruggedly designed, accurately

machined, precision inspected, carefully assembled and thoroughly tested. In

order to maintain the high quality of your unit, and to keep it in a ready condition, it

is important to follow the instructions on care and operation. Proper use and good

preventive maintenance will lengthen the life of your unit.

ALWAYS INCLUDE THE UNIT SERIAL NUMBER

IN YOUR CORRESPONDENCE.

ECO NO REV CHANGE FROM BY DATE APVD

HALE PRODUCTS, INC.

A Unit of IDEX Corporation

Conshohocken, PA 19428 USA

0023 A Initial Release LwH 01/31/2005 MAL

252 B Separate Power Feed LwH 11/07/2005 MAL

NOT TO BE REPRODUCED OR USED TO

MAKE OTHER DRAWINGS OR MACHINERY.

CHECKED BY PRW 11/07/2005

Manual p/n: 029-0020-81-0, Rev. -B

Printed in U.S.A.