Instruction Manual

PAGE 1
INSTALLATION R865 HALCYON 1 Warning CA135 only if used in non-tilted or internally tilted position. If luminary is likely to / be frequently adjusted, | install as CA135. IC Rated if used externally tilted position only. If covering and abutting with insulation always secure the screw on the tit mechanism to lock tilted position so luminary cannot be pushed back into housing. If luminary is not tilted and covered and abutted with insulation, fitting will overheat.
PAGE 2
CLASSIFICATION SHEET HALCYON Manufacturer / Supplier Halcyon Lighting Ltd Product Code R865 Product Type LED Recessed Luminary Secondary Voltage 500mA 18VDC Constant Current Wattage SW Ingress Protection Rating P20 Rear of fitting may abut structural members and building elements. Do not install through or directly into joist, beam, rafter or ceiling batten. Externally Tilted IC — building insulation that can safely be Classification continuously exposed to 80°C allowed to abut and cover the luminary.