Specification

Bi-Level Motion Sensor & Remote Technical Specications
Halco Slim Canopy Series
Product #: Type:
Project:
Comments:
Date:
Initials:
Halco Lighting Technologies 2940 Pacic Drive | Norcross, GA 30071 | Toll Free 800.677.3334 | Phone [phone] | Fax [phone] | halcolighting.com | Atlanta | Chicago | Cleveland | Houston | Los Angeles | Phoenix
© 2019 Halco Lighting Technologies, LLC. All rights reserved. Halco and ProLED are registered trademarks of Halco Lighting Technologies. All sizes and specications are subject to change.
Button Name Description
28Input
Input Voltage Range 108-305VAC
Rated Input Voltage 120/277VAC
Stand-by Power < 1.0W
Wiring Method Push terminal
Output
Operating Mode ON/OFF 0-10V
Load Power 3.6A@120VAC; 3.4A@277VAC
1-10V Dimming < 50mA (Non constant current source)
Wiring Method Push Terminal
Sensor
Parameters
HF Operating
frequency
5.8 GHz ±75 MHz, ISM Wave Band.
HF Radiated power 0.5mW Max.
Detection Area 100%/75%/50%/25%
(Remote Control:100%/75%/50%/25%)
Hold time
8S/30S/1min/5min/10min/15min/30min
(Remote Control:8S/1min/5min/15min/30min)
Stand-by Period
0S/1min/3min/5min/10min/30min/+∞
(Remote Control: 0S/1min/5min/30min/+∞)
Daylight Sensor
5lux/15Lux/30Lux/50Lux/100lux/150lux/Disable
(Remote Control: 5lux/15Lux/50Lux/150lux/Disable)
Stand-by Dim Level
10%/20%/30%/40%
(Remote Control: 10%/20%/30%/40%/50%)
Detection Distance
Diameter*Height
12m*8m (Max.)
Detection Angel 150° (Wall mountin), 360° (Ceiling mounting)
Operating
Operating temperature -35℃~70℃
Button Name Description
Transmit Upload the settings
Detection
Area
25%/50%/75?100%
Hold Time
The Timeout fro 100% to dim 8S/1 min/5 min/
15 min/30 min
Daylight
Threshold
5 Lux/15Lux/50Lux/150Lux/Disable
Stand-by
Period
The timeout from dim to o 0S/1 min/5 min/30 min/+
Stand-by
DIM level
10%/20%/30%/40%/50%
Auto
Mode
A. Movement Motion detects 9.8ft-19.7ft/3-6m
B. Presence detects 9.8ft-19.7ft/3-6m
C. Presence detect with daylight harvesting 9.8ft-19.7ft/3-6m
D. Highlight Mounting: 19.7ft-49.2ft//6-15m
E. Highlight Mounting with daylight harvesting: 19.7ft- 49.2ft/6-15m
ON-OFF Permanent ON/OFF
Reset
Press “Reset” button for factory testing purpose only.
Ambient
Threshold
Press this button to set the current suitable daylight threshold.
Dim+ /
Dim-
Adjust the light level when motion detected.
*1/2/3/4 4 optional quick settings
Detection
Area
Hold Time Daylight Sensor
Stand-by
Period
Stand-by
dim level
100% 1 Min Disable 3 min 20%
Remote Control MH02