Specification

Halco Round High Bay - RHB Series
Product #: Type:
Project:
Comments:
Date:
Initials:
Ordering Information
Halco Lighting Technologies 2940 Pacic Drive | Norcross, GA 30071 | Toll Free 800.677.3334 | Phone [phone] | Fax [phone] | halcolighting.com | Atlanta | Chicago | Cleveland | Houston | Los Angeles | Phoenix
© 2019 Halco Lighting Technologies, LLC. All rights reserved. Halco and ProLED are registered trademarks of Halco Lighting Technologies. All sizes and specications are subject to change. 03-28-19. Re-order #19012.
Please Contact a Halco Representative for more information
Cord Set Options are assembled to order. Lead times apply. Battery Backup Option is Assembled to Order. Lead times apply.
Motion Sensor options are assembled to order. Lead times apply.
Example:RHB150/110U/50
Family Wattage / Distribution Voltage* / CCT BBU Cord Set* Controls*
RHB=
Round High Bay
100=100W
150=150W
200=200W
240=240W
110=110 Degrees U=120-277V
40=4000K
50=5000K"
(Omit)=None
EM=Battery Backup
(Omit)=None
C1= 6' 120V Cord &
L5-15P Plug
C2=6' 277V Cord & L7-
15P Plug
(Omit)=
None
MS=B-Level
Motion Sensor
Performance
- Multiple lumen packages available ranging from +12,000
through +32,000
- Leds are rated for greater than 100,000 hour life with calculated
lumen maintenance >70% (l70) at 25°c.
- 0-10V dimmable driver standard available in 120-277v
- -40° To +55°c ambient operating temperature
- Power factor > 0.9
- 6Kv surge protection
Design
- Compact, lightweight design to optimize ease of shipping
and installation
- Customizable beam angle options
- Sleekndesigntoaidheatdissipation
Environment
- IP65 rated
- UL wet location listed
- Rohs compliant
- Meets FCC part 15, subpart b, class a standards for
conducted and radiated emissions
- ANSI/NSF 2
Certication
- All luminaires are built to UL1598 standards, and bear appropriate
culus labels for wet location
- DLC®(designlightsconsortium)premiumqualied-see
www.Designlights.Org
- IP65
- TestedandCertiedunderETLSanitationforANSI/NSF2Standards
100W
150W
200W
240W
Construction
- Innovative ADC12 aluminum die-casting heat sink
- 3/4” NPT steel hook standard
- 6ft - 18/3 SJTW 3c shielded power feed cord included standard (power and control wires)-(power and control wires)