Installation Guide

© 2018 Halco Lighting Technologies, LLC. All rights reserved. Halco and ProLED are registered trademarks of Halco Lighting Technologies.
All sizes and specications are subject to change.
Halco Lighting Technologies | 2940 Pacic Drive | Norcross, GA 30071 | Toll Free 800.677.3334 | Phone 770.242.3612 | Fax 800.880.0822 | halcolighting.com | Atlanta |Chicago | Cleveland | Houston | Los Angeles | Phoenix
Linear LED Vaportight High Performance
Luminaire Motion/ Photo Control Instructions
®
LVTH4CL/WR (#99629) Motion/Photo Wireless Remote Control
1. Detection Coverage
Function Demo - Dimmable control/ Corridor function
2. Operation
The LVTH4CL/WR requires 2AAA batteries for operation. To set parameters of the Motion/Photo Microwave sensor, the wireless remote control must
be within 15 feet (4.5 meters). The LVTH4CL/WR can be used to directly control the Microwave Motion/Photo sensor that sensing the presence and
movements of the occupants without requiring unobstructed line-of-sight. The Microwave Motion/Photo Sensor is integral to the Linear LED High
Performance Vaportights with a “MC” designation in the product code.
NOTE: Above detection coverage is recommended actual coverage may vary depending on luminaire conguration and environmental conditions
After the stand-by period, Light OFF.
After last detection, the light will be
dimmed down to the stand-by dim-
ming level(10%,30%,50% ).
When motion detected, insufcient
daylight.Light ON.
When motion detected, but sufcient
daylight.Light remains OFF.
Ceiling Mounted Wall Mounted
Top View Top View

Summary of content (2 pages)