Instructions / Assembly

ManualsBrandsHalco Lighting Technologies ManualsLED BulbsProLED HID LED Replacement 250-Watt Equivalent Corn Cob ED28 Non-Dimmable LED Light Bulb Mogul Base Daylight

Installation

WIRING INSTRUCTIONS

STEP 1

Turn off power.

STEP 2

As Shown in Figure 1, remove the old bal-

last, capacitor and Ignitor (if existing).

STEP 3

As shown Figure 2, make sure the alter-

nating current wires connect to the E26 or

E39 socket directly. (Reattach or replace

ground lead if one is needed).

STEP 4

As shown in gure 3, screw the LED amp

into the corresponding socket. Attach retro

t label to the luminaire and rotate base to

the desired light angle.

© 2018 Halco Lighting Technologies, LLC. All rights reserved. Halco and ProLED are registered trademarks of Halco Lighting Technologies. All sizes and specications are subject to change. Print Edition 04-20-18.