Instructions / Assembly
Installation Steps Continued:
3
4
As shown in Figure 2;
Connect A/C line voltage wires directly to EX39 socket.
(Reattach or replace ground lead if one is needed)
As shown in Figure 3;
Screw the LED lamp onto the corresponding socket.
L
N
Fig 2
Halco Lighting Technologies | 2940 Pacic Drive | Norcross, GA 30071 | Toll Free 800.677.3334 | Phone 770.242.3612 | Fax 800.880.0822 | halcolighting.com | Atlanta | Carlstadt | Cleveland | Houston | Los Angeles | Phoenix
Fig 3
L
N
© 2016 Halco Lighting Technologies, LLC. All rights reserved. Halco and ProLED are registered trademarks of Halco Lighting Technologies. All sizes and specications are subject to change. Print Edition 11-05-16.