Installation Guide

© 2017 Halco Lighting Technologies, LLC. All rights reserved. Halco and ProLED are registered trademarks of Halco Lighting Technologies.
All sizes and specications are subject to change. Print Edition 01-20-17
Halco Lighting Technologies | 2940 Pacic Drive | Norcross, GA 30071 | Toll Free 800.677.3334 | Phone [phone] | Fax [phone] | halcolighting.com | Atlanta | Carlstadt | Cleveland | Houston | Los Angeles | Phoenix
8
Not for use in applications where contact with insulation will occur.
6
7
After the power cord is correctly connected, reinstall
the access plate. Verify that the LED light works prior
to installing into the ceiling.
Attach the safety cables as necessary.
5
Install the xture into the ceiling or designated space.
Installation Steps:
3
Remove the access plate. Open up one of the knock-
outs to allow the power cable into the driver box.
Connect the power cable wires to the wiring terminal
through the opened knockout. Ensure that the wires
have a strong connection.
4
LINE
NEUTRAL
GROUND
White
Neutral
Green
Ground
Black
Line