Operation Manual

54 05-7175-00-00.fm

Maintenance and Servicing

5.3.8 Charging the battery (only 7175.30)

The batteries are charged with the charger Fig. 16-A. The batteries can

already be charged when one segment in the charging status indicator

Fig. 14-51 has gone out.

1. Place the machine on a level surface and turn it off.

2. Disconnect the battery plug Fig. 16-B on the machine.

3. Connect the battery plug of the machine to the charger Fig. 16-C.

4. Switch on the quick-charger. For charging times, please refer to the table,

see section 5.3.7.

5. During the charging process, the battery charging status is displayed in the

display Fig. 16-D of the quick-charger. In the meantime, the charging con-

trol indicator Fig. 14-51 in the display panel is not active!

6. Terminate the charging process:

• Switch off the quick-charger

• Disconnect the battery plug from the charger and reconnect it to the

machine Fig. 16-E.

Attention

• The number of quick charging processes is limited to four a day.

More frequent utilisation may result in excessive heat and

premature failure of the batteries.

• Only charge the battery with the supplied quick-charger!

Note

• An error is present when the battery symbol flashes in connection

with a field, see operating manual of the charger.

Fig. 16: