User's Manual XQB60-C Automatic Washing Machine Contents Before using Names of the parts The 2nd cover Safety precautions 1 Installation and adjustment 3 Install the water inlet hose 5 Using process Please read this manual carefully before using. Retain it for future reference Please check if the power receptacle has good earthing condition before using to guarantee your safety. The manufacturer will not bear the responsibility for those risks occurred from not obeying this manual.
Before using Names of the part s Water valve Control panel film Top lid Water level Switch Control panel Lint filter(Installed by user) Control panel film Back cover Cabinet handle Pulsator Inner tub Cabinet Power line Base frame Adjustable foot Inner drain hose Adjustable foot seam Accessories Bottom plate (1 piece) Water inlet hose (2 pieces) Water inlet hose jointer (2 pieces) Tapping screw ST4x 16 (1 pieces) Drain hose (1 pieces) Hose clamp Lint filter (1 pieces) (1 piece) The end conn
Safety precautions Please insert the power cord into special receptacle with rated voltage.Be sure to use single-phase three pins receptacle. The earthing terminal must be earthed reliably.If possible,please adopt electric leakage protector. Before using In normal usage of the washing machine, the power plug shall be ready to be pulled or plugged with hand.
Safety precautions Before using Do not put hand into the rotating tub. It is dangerous even if the rotation speed is slow. Take special care of the children. Keep children away from the washing machine to avoid them climbing on it. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.).
Before using Safety precautions Please install and adjust the machine according to the requirement of the manual, which is very important for you to operate the machine safely and properly. Install the lint filter Insert the bottom of the lint filter ( marked with down side ) into the filter frame, then push the upper part of the filter in ( marked with up side ).
Before using Install the outer drain hose Connect the outer drain hose to the inner drain hose by using the drain hose clamp clip them. Remarks: The direction of the drain hose can be changed by professional person. Usage of the drain hose The drain hose shall drain smoothly 1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2.Do not ramp or press the drain hose.
Install the water inlet hose Before Using Install the water inlet pipe Water faucet, suitable water faucet, not suitable It is required that the front end shall be longer than 10mm. The outlet end surface of the faucet shall be flat and smooth. If not, please file it smooth to avoid leakage. Connection between the water inlet hose jointer and the water faucet 1.Press the lower end of the lock lever and push down the slider. Take off the water inlet hose jointer from the water inlet hose component.
Before Using Connection between the water inlet hose jointer and the water inlet hose 1 Push down the slider. Plug the water inlet hose into the jointer. 2 Hang the lock lever onto the jointer. Release the slider till a click sound is heard. Locking level The water inlet hose jointer Slider Check the connection between the water inlet hose jointer and the water faucet 1.Swing the hose gently to check if it is fastened stably. 2.After installation, open the faucet to check if it leaks water. 3.
1Preparation before washing Using process Preparation before washing 1 Connect the water inlet hose. Open the water faucet. 2 Confirm that the washing machine is earthed reliably. Then plug the power plug into the receptacle. The earthing terminal shall not link to gas pipeline and faucet water pipeline. 3 Put down the drain hose. Earth Pay attention to the followings before washing Check if the laundries have special requirement on washing Clear the pocket. Take out the coins, sand, hairpins etc.
2 Put in the laundries Using process The capacity of washing and spinning refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one cycle. Washing quantity for one cycle shall be less than the rated capacity.The largest capacity of this machine is 6.0kg. The thickness, size and type of the cloth will influence the actual washing capacity.
3 Add the detergent and softener Using process How to use the washing powder How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Do not use whitener on laundries with color or print as they are not colorfast. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and dosage of the whitener. As to whitener in powder, please dissolve it before using.
4 Use the operation buttons Using process a Description of the function of the operation buttons Mode and meaning of the indicator Flash: indicating the running mode On: indicating the mode about to run Flash rapidly: indicating abnormal situation SELE CT butto n Push it to select one or more programs from WASH RINSE and SPIN
Using process POWER switch button WATE R LEVE L Push the On/Off button to switch on the power. When the power is on, push it again to switch off the power. Select or adjust water level WATER LEVEL POWER Reset High Middle Low ON OFF Remarks: Push the On/Off button to switch on the power. If the washing machine is idle for 10 minutes, it will automatically switch off the power.
Using process b Steps of using the operation buttons and description of each step. Attention Even there's no water in the tub, a certain period is required before spin starting. Separate the laundries that are not colorfast from other laundries in washing. WATER LEVEL POWER Reset High Middle Low 1.Push the POWER button to switch on the power.
Using process 2.Select suitable automatic program. After switching on the power, the machine will set standard program automatically. To select other automatic program, push the suitable button till the relative indicator is on. Refer to the PROGRAM button on Page 11 for the selection. For instance: Push the SPEEDY program for quick washing of laundries with light soil.
Using process Procedure selection method Times of pushing the SELECT button Selected procedure Applicable circumstance Contents (the lighted indicators indicate the programs about to run) WASH RINSE SPIN WASH RINSE SPIN When prevent the laundries from corrugating, and the laundries do not need spinning WASH RINSE SPIN RINSE - SPIN When the laundries need rinsing and spinning after manual washing WASH RINSE SPIN Spin (spin after drain) When the laundries need only spinning after manual was
7 Disposal After Washing Using process Cleaning the lint filter The lint filter must be used during washing. It must be cleaned in time after each using. 1.Take off the lint filter Put hand at the indicated positon. Push down to take it off. (See to Figure 1) Figure 1 2.Clean the lint Put it in water and clean while it is still wet. (See to Figure 2) 3.
Trouble-shootingAnswers to questions (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomenon Reason How to solve The wash, rinse spin and gentle s lamps are flashing. The machine does not spin. The top lid is opened.
Packing list Name Quantity Storage position User's manual 1 piece Inside the document bag Lint filter 1 piece Inside the document bag Water inlet hose component 1 piece Inside the inner tub Bottom plate 1 piece Between the upper cushion of the washing machine package and the upper seal of the package carton Tapping screw 1 pieces Inside the document bag Outer drain hose 1 pieces Inside the inner tub Drain hose clamp 1 pieces Inside the inner tub Fuzzy logic automatic washing machine
Specifications Model XQB60-C Rated voltage frequency 220-240V ~ Rated washing / spinning capacity 6.0kg Water level/Water quantity (about) 50L/High, 42L/Middle, 34L/Low Max water consumption About 150L (the highest water level, normal program) Water inlet pressure 0.03MPa-0.
