Spin-drier This manual is for T60-32 Please read this manual carefully before using. Retain it for future reference.
Contents Names of the parts Safety precautions The musts in using Using sequence Trouble-Shooting *Answers to question Packing list *Specification
Names of the parts Cover of the spin tub Knob of spin timer Inner cover Water-filling entrance Panel support Control panel Power line Handle Spin tub Drain hose Cabinet Base frame Back cover Fixing leg (four pieces) Note:The figures in this manual can only be regarded as diagrammatic sketches. Please understand that, due to constant improvement of design, the extractor and its accessories that you have purchased may be inconsistent with these figures in the manual.
Safety precautions Please insert the power cord into special receptacle with rated voltage.Be sure to use single-phase two pins receptacle.If possible,please adopt electric leakage protector. When the machine is normally using, please put the power plug at the location easily to be inserted and extracted by hand. Be sureto pull the plug off when there'spower failure, orthe machine is being moved, cleaned or when it is idle. Earth Do not bend, stretch, twist, bind the power cord by force, or reform it.
Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.). Handicapped or children without care shall not use the machine.
The musts in using Usage of the panel OFF 5 1 4 2 3 WATER INLET SPIN TIMER Water-added rinsing-spinning, to be used during defoaming -spinning. Set the spinning duration depending on the category and amount of the articles. To set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer Usage of the drain hose The drainage shall be smooth with the drain hose. 1.
Using sequence Preparation before spinning Please make the machine stand horizontally. Confirm that the washing machine is earthed reliably . Then insert the power plug I nto the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. Put down the drain hose .
Notes on Spinning Use the foam-removing spinning to remove the extra detergent liquid. It can both shorten the washing time and save the water consumption. Please put in the gland properly even if the laundries quantity is small. .Do not leave any articles above the depression cover. Push Gland Proper The laundries are slanting To protect your laundries and washing machine, please takeout all of the coins, buttons, sand, hairpin and other foreign materials beforewashing.
Trouble-shooting Answers to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason-How to solve The machine does not act. Is there power failure--Please use it when there's power supply.
Packing list Name Quantity User's manual One piece Water inlet hose One piece Gland One piece Spin-drier One set Specification Injection pressure(MPa) 0.02 0.2 Rated spinning capacity kg 6.
