Front Load Washing Machine Model:slim3 1.Contents---------------------------------------------------------------------------------------1 2.Features --------------------------------------------------------------------------------------3 3.Sale points------------------------------------------------------------------------------------4 4.Specification ---------------------------------------------------------------------------------5 5.
Front Load Washing Machine FRONT LOAD Model:slim3 WASHING MACHINE Service Manual Suited model: Slim3 Features： ●300mm diameter porthole, door may be open at a 180 degrees. ●Class-A energy-saving; Homocentric tubs with higher energy efficiency ●Multi-gear speed controller ●Unique gasket design featuring no residual water hidden inside ●Delay time adjustive ●Large wash load capacity 5kg ●With AQUA STOP inlet hose,further improve the grade of safety Serial Number: SM HW-DS50TVE SERIES-01 Version:00.
Front Load Washing Machine Model:slim3 FEATURES ●300mm diameter porthole, door may be open at a 180 degrees. Facilitate view of wash process, facilitate unloading and easy to use with large port. ● Class A energy-saving,Class B washing performance Scientific design for tub can reduce the use of water heavy during washing, consequently upgrade the energy efficiency class to A,also use scientific washing in order to getting class B washing performance.
Front Load Washing Machine Model:slim3 SPECIFICATION 1. 2. 3. 4. Proposal Front load washing machines Product identification Description of appliance Type of appliance (FS = standing, BI = built-in) Supplier own brand Supplier bar code Mares computer code Commercial Brand / Model Commercial bar code Key-Features Energy efficiency class Washing performance class Spin efficiency class Programs Capacity Spin speed (max.
Front Load Washing Machine 5.
Front Load Washing Machine Model:slim3 ７
Front Load Washing Machine Model:slim3 7
Front Load Washing Machine Model:slim3 8
Front Load Washing Machine Model:slim3 9
Front Load Washing Machine Model:slim3 10
Front Load Washing Machine Model:slim3 Maintenance 11
Front Load Washing Machine Model:slim3 12
Front Load Washing Machine Model:slim3 Net dimension 398CM 850CM 595CM 13
Front Load Washing Machine Model:slim3 Names of the part Detergent distribution drawer Top panel Display Selection knob prothole Operating buttons door Door handle 14
Front Load Washing Machine Model:slim3 15
Front Load Washing Machine Model:slim3 16
Front Load Washing Machine Model:slim3 Slim3 Error Display and Troubleshooting Error message:Door is not properly shut 20s after program is started. Troubleshooting: Pushing the door to Check Whether Door is properly shut or not Shut the door properly N Y Cut off the power and then turn on again. Check the voltage between brown wire and red wire of door lock, is it between AC 220-240V? Door Y lock is broken and need replacing, then make sure wire is connected properly.
Front Load Washing Machine Model:slim3 Cut off the power and choose spin program to start, then check the import voltage of drain pump, is it between AC 220-240 V? Y Replace drain pump N Cut off power and pull out water level pressure switch wire connection. Set spin program to start. Check the export voltage to drain pump, is it between AC 220-240V?between blue wire and green wire Y The wire between PCB and drain pump is not connected properly. Replace the wire.
Front Load Washing Machine Model:slim3 Error message :The heater may be broken Troubleshooting: Cut off power ,check the resistance Of two pins of heater element by N multimenter is it between 32-35Ω ? Y Heater element must be broken please replace it Turn on power ,and set wash mode,then start ,check the export voltage of heater element between 12-6 and J9-9 ,is it between AC 220-240V? Y PCB must be broken, please replace it Error message:The required water level is not reached within 8 min.
Front Load Washing Machine Model:slim3 Turn on power, and set pre-wash mode, then start. Check the import voltage of electromagnetic valve by multimeter , is it between AC 220-240V?if the hot water can also come into dispensor..check the voltage between the white wire and blue wire that they are not connected Electromagnetic valve must be broken, please replace Y it. N The wire connected PCB and inlet valve is not Check if export voltage from PCB to Y properly. Please reconnect it or replace it.
Front Load Washing Machine Model:slim3 Error message. Motor overheat protection or is damaged. Troubleshooting: Cut off power and check if motor wires Reconnect well N are connected well Y Put the motor in nomal temperature about Measure if resistance of motor winding by ten minutes,and then test again.If the multimeter,is it as followed? 4-5:5Ω 5-6:5Ω N resistance is natural, it is caused by 4-6:5Ω overheated protection.Then check Y and deal with overload,abnormal voltage.
Front Load Washing Machine Model:slim3 Replace inlet valve Without power ,connect inlet pipe to inlet Y vavle,then open the tap and observe if water is entering in dispenser N Replace Y Without starting but electrifying, measure the PCB import voltage of inlet valve, is it between AC 220-240V? Slim3 Examination & Troubleshooting Failure:Display nothing Troubleshooting: Repair power supply N Measure the power supply ,is it exists 220V-240V AC voltage？ Y Press the power switch N Is power switch on?
Front Load Washing Machine Choose pre-wash program and start ， Check if there is 220-240V at import pin of electromagnetic valve Model:slim3 Replace electromagnetic valve Y N Reconnect the wire Is there open circuit Y between electromagnetic valve and PCB? N Choose pre-wash program and start ， then check if there is 220-240V at export N （See fig 2） Replace PCB pin of electromagnetic valve Failure:no draining Troubleshooting: Is the height of drain pipe too high? Adjust the height of drain pipe
Front Load Washing Machine Model:slim3 Adjust adjustable feet N Is washer in balance? Y Replace it Y Is belt loose or worn? N Are the screws of counterweight and Fasten them Y motor loose? N Remove belt and turn belt pulley by Dismantle triangle and check the bearing .If it is broken, replace it.
Front Load Washing Machine Model:slim3 Wiring circuit 22
Front Load Washing Machine Model:slim3 Sincere Forever Group Industrial Park, No.1, 266101, Qingdao, Road China http://www.haier.
