PLASMA TV OWNER`S MANUAL MODEL S : P42LV6-T1 P50V6-A8 Please READ this manual carefully before operating your TV, and retain it for future reference.
Congratulations on your purchase, and welcome to the " family " ! Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Haier " family," you`re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. Thanks for investing in a Haier product.
Important Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. 1.
Important Safety Instructions a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have been fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions.
Table of Contents Warning .............................................1 Important Safety Instructions................2 buttons and interface location..............5 Front control panel............................5 Rear control panel.............................6 Remote controller................................7 Keys of remote controller......................8 Function introduction ........................8 Effective range ............................... 9 External Equipment Connections ........
Buttons and interface location -This is a simplified representation of front panel. -Here shown may be somewhat different from your TV. Front control panel P42LV6-HD 1.EXIT: clears all on-screen displays and returns to TV viewing from any menu. 2.INPUT: Source input select 3.CH- /CH+ Program plus and minus, menu options 4.VOL-/VOL+ Volume increase and decrease, menu reset and entry 5.MENU Menu display 6. Power 7.Remote control signal receive window. 8.
Buttons and interface location Rear Control panel P42LV6-HD VGA IN L COMPONENT IN DVI IN R AUDIO OUT VGA AUDIO Pr/Cr Pb/Cb Y L-AUDIO-R HDMI/DVI VIDEO AUDIO SCART2 SCART1 ANT IN SWITCH AC-INPUT 1. AUDIO OUT: Connect to optional external speaker(s). 2.VGA IN(PC) Connect VGA analog cable from the PC to the VGA IN. Connect the audio cable from the PC to the VGA AUDIO IN. 3.COMPONENT IN Connect the component cables from the component output of the video device to COMPONENT IN.
Remote controller Inserting Batteries 1 .Slide open the cover of the battery compartment on the back of the remote controller. 2. Load two AA alkaline batteries in the compartment. paying attention to the polarity diagram in the battery compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. Precautions As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect.
Keys of remote controller - The remote controller cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction STILL Picture static SLEEP Displaying sleep time, adjustable I/II (NICAM) PIP Power Off/Standby any other programmed equipment off. MUTE Switches the sound on or off MUTE STILL SCAN Program scan button SCAN SLEEP PIP ABC@ TV/AV Input source display P.
Remote controller Effective range left 45 45 left right right 45 45 front 8m front 8m DISPLAY -/--/--- DISPLAY -/--/--- POWER FAV. Q.VIEW SLEEP USB POWER FAV. Q.VIEW SLEEP USB PSM SSM TV/AV MUTE CH+ PSM SSM VOLTV/AV MENU VOL+ MUTE CHCH+ VOL- UP MENU LEFT VOL+ DOWN PREV. NEXT H.LOCK CHUP DOWN LEFT PREV. NEXT H.
External Equipment Connections Antenna Connection Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different.
External Equipment Connection NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. Choose the connection which is best for you. VCR connection - To avoid picture noise (interference), leave an adequate distance between the VCR And TV. 1.
External Equipment Connections DVD connection How to connect 1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the YUV IN jacks on the TV and connect the DVD audio outputs to the AUDIO IN jacks on the TV, as shown in the figure. 2 . If your DVD only has an SCART output jack, connect this to the SCART input on the TV. as shown in the figure. COMPONENT IN Pr/Cr Pb/Cb Y SCART2 L-AUDIO-R SCART1 ANT IN NOTE: If your DVD player does not have component video output, use S-Video. How to use 1 .
External Equipment Connections PC connection How to connect or DVI source. 1 . To get the best picture quality, adjust the PC 4 . Check the image on your TV. There may graphics card to (>1024 x768),60Hz. Use the TV`s VGA IN port for video connections, depending on your PC connector. If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of eitherVGA IN to display the PC on the TV.
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. Note ANT IN SWITCH AC-INPUT Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system.
Set up your TV -There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. -In the manual, the OSD(on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation. Switching ON/OFF the TV set 1 Please press down the power switch to switch on AC power supply and the power indicator will light . 2 If the indicator is lighting in red, press button on the remote controller again.
Select input modes Choose the input source If you hope to enjoy the picture from the external input source, before to select the source, you need to connect the devices, otherwise, when you select the source, the none or no signal will appears on the screen. MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP P.STD MENU VOL+ CH- H.LOCK CH.LIST Source television or remote controller, the menu appears on the screen.
Tuning menu This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Full automatic search mode Automatic search 1 Press MENU button and then CH+/- button, the icon to TUNING menu.
Tuning menu Program Table 1 Press MENU button and then CH+/- button, the icon to TUNING menu. 2 MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP P.STD S.STD CH+ VOL- MENU VOL+ Press VOL+/- button to enter submenu, and press CH+/- button to select "Program Table", press VOL+ button to enter. Or press CH.LIST button on remote controller.
Tuning menu Manual search If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP P.STD 1 Press CH+/- buttons or the NUMBER 0-9 button to choose desired searching frequency. (regard channel 18 as example). S.STD 2 After calling up the TUNING menu, press CH+/- button to select "Tuning Program" item.
Tuning menu Fine Tuning If the picture and/or sound are poor, try using the FINE TUNING feature. Do not use this feature unless reception is poor. MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY JKL% MNO POR& STUV WXYZ *#() SWAP P.STD S.STD CH+ VOL- MENU 2 Press MENU button and CH+/- button, till the TUNING menu shown on the right display on the screen. VOL+ CH- 3 Press VOL+ button H.LOCK CH.
Tuning menu You can watch TV program in a presetting channel. How to select the desired program 1 Using "Program number" buttons MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP P.STD Press digit button to select the program. If 2-digit or 3-digit programs are selected , press digit buttons you needed continuously within 3 seconds .
Tuning menu If the colour of some channel is abnormal Usually this should be set in the auto position. However if the colour displayed on the screen are incorrect, you can manually select the correct colour system. MUTE STILL SCAN SLEEP PIP ABC@ GHI$ JKL% DISPLAY DEF Press the MENU CH+/-and VOL+/- button, till the Tuning Program menu shown on the right will display on the screen.
Tuning menu Skip After the programs are presetting, you can skip some programs so that to select your favorite channels only. MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF JKL% MNO POR& STUV WXYZ *#() SWAP P.STD S.STD CH+ VOL- MENU VOL+ CH- MENU PICTURE AUDIO 2 . Press MENU GHI$ TV/AV 1 . Press CH+/- button or Direct-digit Choosing button to select a channel directly (take channel 18 for example).
Picture menu How to select picture modes You can quickly select the desired picture mode from three preset modes and one customized mode. MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP P.STD S.STD CH+ VOL- MENU Press the P.STD button to call up Video mode menu, and press CH+/-button to select the desired picture quality. Four kinds of picture modes (i.e., "Normal", "Soft", "Personal" , "Bright", ) can be selected in turn.
Picture menu Noise Reduction Automatically filters out and reduces the image noise and improves picture quality when receiving weak video signals. MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ 1 After calling up the Picture menu, press CH+/- button to select "Noise Reduction" item. MENU PICTURE TV/AV *#() SWAP P.STD S.STD CH+ VOL- MENU VOL+ 2 Press VOL+ to enter AUDIO the list. Select Off , Auto Weak , Medium or Strong according to the image noise.
Sound menu To choose sound modes You can quickly select the desired sound mode from three preset modes and one customized mode. MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() Audio Mode Music Standard Hall Personal SWAP P.STD S.STD CH+ VOL- Press the S.STD button to call up Audio mode menu, and press CH+/- button to select the desired sound quality. Four kinds of sound models (i.e., Music , Personal , Standard and Hall ) can be selected in turn.
Sound menu Setting Five Equalizer sound The sound settings can be adjusted to suit your personal preferences. 1 Press MENU button and then CH+/- button to select AUDIO menu. MUTE STILL SCAN SLEEP PIP DISPLAY MENU ABC@ GHI$ POR& TV/AV JKL% STUV *#() DEF MNO WXYZ to select "Five Equalizer", then press VOL+ buttons to enter the submenu. PICTURE S.STD CH+ MENU VOL+ 0 0 Volume Balance Audio Mode Five Equalizer Surround Auto Volume Woofer AUDIO ADJUST TUNING FUNCTION TIMER SWAP P.
Sound menu Setting the Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel and reduces the volume differences between channels and programs, providing a more constant overall level. This will also reduce the dynamics of sound.
Timer menu Timer setting The clock will only work if the TV set is turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power on the rear panel, the clock loses power and will need to be reset when the power MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() 1 Press the MENU button and CH+/- button, till the TIMER menu display on the screen. SWAP P.STD S.
Timer menu You can set the On/Off timers so that the set will : Switch on automatically and tune to the channel of your choice at the time you select. Switch off automatically at the time you select. On/off timer \Timer on Prog\ Timer Prog 1 Press MENU and VOL+/- button to call up the TIMER menu on the screen. MUTE STILL SCAN SLEEP PIP ABC@ MENU DISPLAY PICTURE DEF AUDIO GHI$ JKL% MNO POR& STUV WXYZ ADJUST TUNING FUNCTION TV/AV *#() P.STD S.
Function menu It is possible to select language, OSD transparent, position and screen display of the menu as follows: Function setup 1 . Press MENU button once, and the CH+/- button until the following menu appears on the screen: MENU MUTE STILL SCAN SLEEP PIP DISPLAY PICTURE AUDIO ABC@ DEF ADJUST TUNING GHI$ JKL% MNO POR& STUV WXYZ FUNCTION TV/AV *#() English 15 seconds Transparent Off West Europe SWAP P.STD S.
Function menu Function setup (continue) Calendar display and check Repeat step 3 and 4 to enter Calendar menu as follows: MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP P.STD 2005-01-01 Sun. Mon. Tue. Wed. Thu. Fri. Sat. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Press VOL+/- to select among year, month and day, and then CH+/- to adjust them. S.
Adjust menu To choose picture aspect ratio 1 Using MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() S.STD CH+ VOL- MENU button. Press ZOOM button to select the desired picture ratio. Three kinds of aspect ratio models (i.e., " Normal " , " Wide screen" and " 4:3 mode " ) can be selected in turn. Normal Normal Wide screen 4:3 mode Picture effect Aspect ratio SWAP P.
Adjust menu In PC and HDMI/DVI input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference and decentered picture as follows: H-Position and V-Position adjust Adjust is opted for adjusting H-Position and V-Position as well as relative parameters in VGA and DVI modes. 1 . Press MENU button and CH+/- to call up the ADJUST menu.
Adjust menu RGB/Default/Auto Sync 1) RGB is opted for adjustment of the numerical value of red, green and blue in PC,HDMI/DVI mode. 2) Default is opted for adjustment of parameters to delivery setup in PC mode.(After the operation, complete will be on the right of the operation) MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() 3) Auto Sync is opted for adjustment of picture location frequency and phase parameters in PC mode.
Lock setup How to use the password function The television has the function of security default lock. Password needs to be entered when the program lock mode is to be set. Press H.LOCK button, Password will appear on the screen. The initial password of the television is 0000 and security default password is 9443. then enter Lock Set menu.(as follow) LOCK SET MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP P.STD S.
Lock setup Tuner Lock Press CH+/- to select Tuner Lock and VOL+/- to set On/ Off. (To set On, some operation such as search will be not available. When enter the TUNING menu, Tuner Lock will be on the screen, and the time will be the same with the main menu if no operation. If you want to operate TUNING menu, you need to enter the Lock menu to set Tuner Lock Off or operate Clear Lock. MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP P.
Lock setup Child Lock MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() Press CH+/- button to select Child Lock. Press VOL+/- button to set On or Off mode. If lock on mode is set, Child Lock is in activated automatically. In such case, if Child Lock button (button on the television) is pressed, the screen will display Child Lock, which can be erased by press of EXIT button.
Picture in Picture Preparation Press the PIP button on the remote control to swicth to PIP function. PIP position MUTE STILL SCAN SLEEP PIP ABC@ GHI$ JKL% DISPLAY DEF 1 Press MENU button and then press CH+/- button, till the TUNING menu shown on the right display on the screen. MENU PICTURE MNO 2 Press the CH+/- button to select POR& STUV WXYZ PIP Position item. AUDIO Tuning Program Country ADJUST Auto Search TUNING Program Table PIP Source FUNCTION TV/AV *#() SWAP P.STD S.
Others functions NICAM If the broadcaster is transmitting Bilingual sound service. The / button on the remote controller will allow up to 2 separate languages to be selected. You can press the / button to make a choice. MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP P.STD S.
Others functions Sleep Note: The ON TIME setup and the SLEEP setup is absolute one another. The TV set will switch automatically to standby at the preset time with the SLEEP time on. You may set the sleep time, Operate as follows: 1 . Press SLEEP button repeatedly to select the number of preset minutes, the timer will be set in sequence: 0Min 15Min 240Min 0Min MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY MNO POR& STUV WXYZ SWAP P.STD S.
Teletext functions Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular programme is being broadcast (cable networks, satellite channels, etc.). Teletext function operation MUTE STILL SCAN SLEEP PIP ABC@ DISPLAY DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP P.
Teletext functions (MIX) While in Teletext mode press the button will show the teletext data superimposed on top of the TV picture. Press the button again to revert back to Full text. (HOLD) Pressing the button will stop the teletext page automatically updating. This feature is very useful where there are several teletext pages or data on the same page number. (ZOOM) Pressing the button to change from different screen display size.
Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 . Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it`s almost dry, and then use it to wipe the screen. 2 .
Specifications and functions P42LV6-T1 Screen Type PLASMA DISPLAY PANEL Viewing angle >170 (H)/170 (V) Diagonal Color system TV/VIDEO P50V6-A8 Sound system Video input DTV YCbCr YPbPr 42 PAL, SECAM, NTSC-M D/K I B/G M SCART (CVBS, Y/C, RGB), YCbCr 480i/p, 576i/p, 720p, 1080i Sound UPO 2x7W Power ~ 150-240V Dimensions (WxHxD) mm (With stand Power consumption Standby consumption Condition 50 2x10W 50/60Hz 1050X320X750 1495X440X895 Max.320W Max.
Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power. Verify if electricity is available. Blank screen Verify if correct signals are input. Press TV/AV button to change signal input to TV input.
0090506971G 02
