USERS’ GUIDE Thanks for purchasing Haier mobile phones, which are a combination of the essence of high technologies, stylish designs and a plenty of functions. They are expected to bring endless funs to your life. Before the use of Haier mobile phones, please read this users' guide and keep it carefully for further reference. This guide serves as an operation guide instead of a quality guarantee.
IMPORTANT SAFETY PRECAUTION When using this product please follow the safety precautions below to avoid possible legal issues and damage. SAFETY IN AN AIRCRAFT Your cell phone can cause interference in an aircraft's navigation system and its network. In most countries, using this product on board an airplane is against the law. SAFETY IN VOLATILE ENVIRONMENTS Do not use you cell phone in gas stations.
Attention There are no user serviceable parts inside this product. If this product appears to be broken, call qualified service personnel and send this product to the appointed mainantenance service center. Do not attempt to disassemble or repair this product as it may result in electric shock or unrecoverable damage to the product itself. Keep this product out of reach of small children. Store this product in its protective case in a cool dry place.
Fast guides for N60 Mobile phone * Enter main menu 1. In idle mode press left soft key to access main menu. 2. In the main menu, press up/ down/ left/ right of navigation key to select menu list. 3. In the main menu, press left soft key to access the selected menu. 4. In the main menu, press the right soft key to switch display mode of menus. 5. Press OK to access the selected menu in the main menu. 6. In the main menu, press HOME key to return to the idle screen. 7.
enter PDA operation mode. * Directions for use touch-pen The touch-pen of mobile phone can help you operate the mobile phone better. The touch-pen is a perfume pen, before use it inject the selected perfume in the special cylinder of the touch-pen. Notice: please control the speed and quantity during injecting. * Correct using the MMC/SC card Use the MMC/SD card and thick battery in this phone.
Notice: If according to this step operation cannot cause the contact of phone to destroy and is unable to use. To install and take out the battery, please accord to correct method above.
Ⅰ introduction to your phone 1.1 Keypad Power/hang up key The red key on top right corner of the keypad is power key. Press and hold the key can switch on/off the mobile phone. Pressing the key can end a call during a call or reject to answer a call. Pressing the key in the profile menu can save set return to the idle mode. Call key The green key on top left corner of the keypad is call key. You can dial or answer a call with the key. Press the key in idle mode can enter ‘outgoing call list’ option.
Touch-pen Camera key Right side key 2 Right side key 3 Left soft key Right soft key MP3 Up key HOME key OK/ Middle key Left key Call key Right key Down key Power/ Hang up CLR key Keypad MODE key MENU key
CLR key Press the key to erase/ erases all text in edit mode; press the key to return to previous menu in no-edit mode.
Camera key This key on the right side of the phone body, press and hold the key in idle mode to activity camera/ video feature. In the ‘camera’ or ‘video’ mode press the key to shoot picture. Right side key 2 On the right side of the body is side key 2, in camera mode, when you browse display press the to zoom in focus; in camera and video mode, right shift the cursor.
5. MMC/SD card: click the SD icon in quick feature columns to enter MMC/SD card option screen to view/ uninstall it. 1.3 Using the power Warning: You must put the phone at the draught of temperature +5℃-+40℃ when charging, and must use the Haier batteries and charger provide by the provider. It will arise danger when you use unconfirmed charger and it will violate certification and guarantee items.
3. Do not pull out the plug of the charger during the charging to avoid harming of the phone and charger. 4. You must put the phone at the draught of temperature +5 ℃ -+40 ℃ when charging, and must use the charger offered by the provider. It will arise danger when you use unconfirmed charger and it will violate certification and guarantee items. 5. Vibrate feature will is invalidate. 4.
phone can recognize automatically. In order to prevent loss and damage information of in the card, should avoid touching the metal plane region, Avoid exposing your SIM card to electricity, magnetism. The card damaged once, the user will not be able to enter the network. Warning: Turn off the phone when you take out the SIM card. Forbids absolutely to insert or to take out the card while the phone connected the external power. 2).
on/off the phone. If the PIN is activated, when you switch on the phone, you may be prompted to enter the PIN code. a. Input the PIN code You can use PIN to protect your SIM card form unauthorized use. Once the PIN is activated, you will be required to enter the PIN code at the time your phone is turned on. For the sake of confidentiality, the code is displayed as a group of “*” in the screen.
indicator on the left top corner of the screen.) and you can make emergency calls without SIM card. 112 is the standard GSM emergency number, which can be used by any GSM network in the world.
Ⅱ Call 2.1 Dial call When your service provider’s icon display the screen, to wit enter idle mode and you can make or answer a call. The signal indicator in the top left corners of the screen Indicates strength of signal being received. There are 4 bars is the most signal indicator. All mobile phones may be obstruction subject to interference, which could affect the performance of the mobile phone. So moving within small range can advance the signal strength.
number’+ ‘w’ (delay time)……, and then press call key (or click ‘call key’ icon by touch-pen) to dial. Method of input ‘w’ as follow: press and hold * key while you input (first show ‘+’ and then show ‘w’ in ‘the number display screen’. For example: extensions fixed phone can be got through directly, input follow number to dial: main phone number ‘P’ extension phone number, then press call key (or click the call key icon by touch-pen), this phone will dial extensions automatically. 2.1.1.
2.1.3 dial from call list In idle mode press the call key to access ‘outgoing list’ of call list, and select a recorded number to dial it directly by press call key. Or select ‘call’ menu in soft key indicator to dial this recorded number. Press up navigation key to access ‘call list’ option and then select a recorded number to dial it directly by press call key. Or select ‘call’ menu in the soft key indicator to dial it.
corresponding station of SIM card will display automatically. 2.2 Access failure When the phone cannot put through, for instance, the opposite party ‘line is busy, he refuse to answer the phone, he is not in the service district or the phone is switch off’, the phone will remind you that ‘the phone cannot put through’.
left soft key (or click the answer in soft key indicator with touch-pen) to answer the new call, the formerly answered call will been hang up. The formerly answered telephone will get into the keep-talking state. If you want to refuse a call you can press right soft key, power/hang up key (or click ‘refuse’ or ‘busy’ icon by touch-pen) to refuse new call. 2.3.
telephone number or the name, it will talk you according to vibration/ ring/ vibration plus ring/ mute by your set. When a new call is coming, press right soft key or power/hang up key (or click cancel or busy button by touch-pen) refuse the new incoming call. According to your set or the service provided by the network, the call maybe alters to other number or in busy state. 2.
stop working); Silent Turn off the voice temporarily in talking then you can hear the opposite party while he cannot hear you. Thus, it is convenient for you to talk with others in your side while talking on the phone. Change the item into cancel mute, then you can return to the normal talking Call list Enter the call list, then you can search the phone number while talking, the talking direction and the talking state. New call Dial the second call (relating to SIM card). 2.4.
When getting through the second telephone, you can choose the following functions: holding, conference call (relating to SIM card), hand free, mute, telephone list. Holding Keep the present call(relating to SIM card), then the both sides can not hear the voice of each other, then the holding alters to cancel holding, press it then you can keep the normal talking. Conference call A call conference of many people can be hole, and a separate talk with the very attendee pointed can be run.
by the notice sound. The following operations can be accomplished by option in the process of conference call; holding, seperarated, hand free, mute, telephone list, redialing. Holding Keep the present call (relating to SIM card), then the both sides can not hear the voice of each other, then the holding alters to cancel holding, press it then you can keep the normal talking.
2.5 change the incoming tone Press right soft key in the await screen (or click the sign mode by touch pen) to change the way of incoming tone. 2.6 Emergency Call In any country where the digital GSM network is used, you can make emergency calls when your mobile phone is placed in the network coverage area (you can get it by means of inspecting the network signal intensity bar on the left top corner of the screen.) and you can make emergency calls without SIM card.
Ⅲ Operation of menu 1. Setting menu option 1.1 Phone setting 1.1.1 Language setting There are ‘Chinese simple’ and ‘English’ options in language set menu, press OK key (or click option with touch-pen) to select you desired language, and then press left soft (or click ‘save’ in the soft key indicator by the touch-up) to store, the language will be changed into the desired language. 1.1.
(or click save icon in the soft key column by the touch-pen) to save your setting. When your phone is in power on state until the set time arrive your phone will automatically power off. 1.1.7 Input set There are Pinying, English, 123digits and stroke input methods in the ‘input set’ menu, and you can accord your need to select. Press left soft (or click save icon in the soft key column by the touch-pen) to save your setting. 1.1.
by touch-pen) to save it. There is ring tone notifying you when a call coming. 3. Vibrate Selected the vibrate option and press left soft key (or click save icon in soft key indicator by touch-pen) to save it. When a call is coming, the mobile phone will vibrate. Otherwise, the phone will be mute. 4. Glint Selected the glint option and press left soft key (or click save icon in soft key indicator by touch-pen) to save it. There are three lights, red, blue and purple.
‘Gold Times’, ‘Coffer Aroma’ and ‘Cyan Fruitage’ and so on. 1.3.
Press left soft key (click the ‘inquire status’ option with touch-pen) to select ‘inquire status’, and the screen show ‘connecting’ and then the screen will show ‘if operating successful’. 1.4.2 Call forward When activate the ‘call forward’ option you can select different type of call forward as well as you can set the forward number. 1.4.2.1 Unconditional After you activate this option, you can forward all incoming call to other phone number. 1.4.2.1.
1.4.2.5 Cancel All Call Forwards Press the left soft key [or click with the touching pen the ‘choice’ in the hint area] of “Cancel all the forwards”, then comes a message frame saying ‘connecting the network’; after having connected, another hint will come out to conform. Once it is conformed, all forwards are going to be cancelled, including “Unconditional”, “No Reply”, “When Busy” and “Not Reachable”. 1.4.3 Call Bar This function can optionally bar the incoming or outgoing calls. 1.4.3.
can enter the screen of setting a new password; then you need to type in the same password twice to finish changing. 1.4.4 Auto Redial If this function is enabled, a hint will jump out to the screen to inquire whether to redial later when there is no reply to your outgoing call. If you choose “Redial”, it will keep on redialing for ten times before ending. If you do not choose “Redial”, the calling is ended.
To enable it, you just need to press OK [or click with touch-pen] to conform “Time Hint” option, and then press the left soft key [or click with touch-pen] to save it. 1.4.9 Hide Code When this function is enabled, your cell phone number will be hidden from the phone’s screen that you are calling. To enable it, you just need to press OK [or click with touch-pen] to choose “Hide Code” option, and then press the left soft key [or click with touch-pen] to save it.
Company” at the present time, all incoming calls will be forwarded to the company’s phones within the “effective time”. 1.5.2.2 Set After entering “Call Forward” and choosing “To Company”, the user can set as his wish “the company number” and “Effective Time”. Then press “Save” or “Cancel ” to go to the up menu. 1.5.2.3 Effect 1. After setting “To Company” and “Time” ----give the key of 6 a long press, then conform to affect “To Company”. 2.
Forward to pre-set. 1.5.3.4 Cancel Enter “Call Forward” in “Call Set” and conform “ Cancel All Forwards” Note: 1. All the set numbers must be cell phone numbers or the telephone numbers with district number ahead; otherwise the long press of the key 3,6 or 9 will fail to effect. 2. If this function lap over the Unconditional, the one set later comes to effect. 3. If the cell phone is turned off, the “Time” will not be extended after the phone is turned on. 4.
be locked. 1.6.3 Change PIN2 It’s similar to Change PIN, and please refer to Change PIN。 1.6.4 Fire Wall After the SIM is changed, all settings in Fire Wall will be saved. 1.6.4.1 SMS Fire Wall “Spam Activating”: all SMS from the numbers on the SMS Spam List will be directly thrown into the trash. But when the SMS Spam List is empty, it’s not allowed to enable “Spam Activating”. “Mobile phone Only”: all SMS from the numbers without the beginning as (+86) 13, will be directly thrown into the trash.
1.6.4.2.3 the White List When entering the white list, the menu in the soft key area offers three options: “Phonebook”, “Manual Input” and “Delete”. The user can either choose from the phonebook or manually input numbers into the white list; if the user wants to delete some numbers, he just needs to press, “Delete” to remove the chosen numbers. 1.6.4.3 Security Fire Wall 1.6.4.3.1 Fire Wall Settings You have to manually input the mobile phone password to set the password to the application.
Note in particular: 1. U-disk Cleaning Up will format (empty) “the user’s data”, so make copies before cleaning up(copy all the files in the user’s data to a PC). You are suggested to carefully use this function. 2. The format of the mobile phone on a pc, or a long time use of the mobile phone as a memorizer, will both affect the quality of camera. After the U-disk cleaning up, the quality of camera can recover. If the user finds an evident decline in the camera’s quality, just use this tool to improve it.
your settings. Other ways such as cutting off the power, pushing the hanging up key and home key won’t save it. 1.8 Profiles Profiles are a group of definitions of the mobile phone’s ring-music, and it is easy to turn on. The mobile phone offers a set of modes, including: “normal mode” “outdoor mode ” “meeting mode” and “silent mode”. For each mode, this is a set of value. The user can change and save the mode as he likes. Meanwhile, the user can rename the mode as he or she likes. 1.8.
will work together; As the “Glint” is on, the glint lights including blue, red and purple will be shining. The default value of “Glint” is “on” in all four modes. Choose “music” and then press OK [or click with touch-pen] to enter the ring music list. After choosing a song or music, press left soft key [click with the touch-pen] to save the setting, or press the button on the right side to cancel this setting and return to the up menu. 2.
“Low Battery”, then press OK [or click with touch-pen] to conform “Low Battery” and to choose whether to turn it on or off. 11. Touch pad Tone: press up-and-down button [or click with touch-pen] to choose “Touch pad Tone”, then press OK [or click with touch-pen] to conform “Touch pad Tone” and to choose whether to turn it on or off. 12.
“Add” in the menu, then you can see several networks in the screen, from which you can choose some to add to your preferred network list. “Delete Preferred Network”: in the screen of the preferred network, you choose “Delete” in the menu to enter the deleting screen, then you can choose some to delete. (Operations above can also be practiced by using touch pen) 2.Communication Menu Application 2.
time of calls, the dates of calls and the lengths of calls, of the recent missed calls(without the call times ), outgoing calls and incoming calls. 2.1.1 Recent Calls 2.1.1.1 Missed calls In the call list, the missed call is defaulted. Entering the Missed Call, you can choose from the menu of the left soft key the functions to operate the missed calls, such as “call”, “save”, “IP call”, “send message”, “set black”, “set white”, “call time” and “delete”.
conform; press the button of right to move the cursor onto “Cancel” then press OK[or click “Cancel” with touch-pen ] to cancel the operation. If you want to delete a certain piece of record, you can move the cursor on this record and then choose “Delete” in the menu. Press OK to delete this record. 2.1.3 Call Time In the Call Record, choose the “call time” in the menu, enter the call time screen. Here, you can see the call time of last call, the total time of outgoing and incoming calls.
Users can change their big-head photos as their wish and do not forget to conform. Users can change and update the record group according to their own demands. To do that, you just need to move the cursor on the “Grouping Options”, the press OK [or click with touch pen] to choose the appropriate grouping, then press the left soft key [or click “save” with touch-pen] and it’s finished. If “SIM Card” is chosen, only one number can be input and no big-head photo.
looking up through initial letter. Here is an example: If the name is “欧阳春雪”, the user should input “o” to look up; and inputting o and y is also ok, so is inputting O,C,Y or O,Y,C,X. IF no letter o, or only O,C, or only O,X, no result can be found. When the name is “Jack Smith”, inputting J or J and S will lead to the name; if only inputting S, no result. When the name is “Jack Smith”, inputting J or J and S will lead to the name; if only inputting S, no result.
management by grouping. Management by grouping refers to set up different kinds of records and incoming call rings and “phonebook”. Another function of management by grouping is to add grouping; the user can define 16 groups. 1. Alter grouping ring styles In altering grouping ring styles, you first need to choose the groups you are going to alter, then move the cursor onto “grouping ring styles”. Then press OK [or click with touch-pen] and enter “ring style” screen. The user can choose the ring as his wish.
number is a mobile phone’s number, the big-head photo, name, number will appear; if the number is a SIM record number, only appear name and number. Method2: choose a record with a number, press OK [or click with touch-pen] to enter the browsing screen, then enter calling screen to call the chosen numbers. When you choose IP call, you call the IP number and your chosen number together; you have to set an IP number before call it. You can find ‘IP set” in the main menu. 2.2.
then to enter the copying screen. Note: the records in the mobile phone can only be copied into SIM card; records in SIMcard can only be copied into mobile phone. 2.2.11 Deleting Records You can use the grouping deleting way to delete records. You just need to choose the records, and then choose “delete” in the menu to enter the deleting screen. The specific ways as follows: Method1: in the browsing screen, choose “delete”.
you identify the account is deleted. 2.3.3 Setting the default account You can press setting default key in the menu and choose an account on the account list. Then the account is set as default setting. 2.3.4 Modifying the account If you want to enter the editing modifying window, you can choose an account on the list, then press the OK (or use the touching pen to touch the account) 2.3.5 The regulations of the mails 1.
the list, you select the receive in the menu of the soft key. then all the e-mails of the account will be received normally. 2. there are several accounts in the list. If you select receive all , the new mails of these accounts will be received. 2.3.8 reading the mails 1. the mails can be read by pressing OK key at any mail box(or be touched twice by the touching pen) 2. if the setting rule of the mail is downloading the head of the mail, then you can only read the brief information of the mai. 2.3.
e-mail successfully, the customers should open the GPRS of the SIM card and set the account correctly. 2. Not choosing the SSL safe identification: setting the POP3 port with 110, SMTP port with 25. then the e-mail will be sent and received in a normal way. 3. Choosing the SSL identification: POP3 port;9110 SMTP port:9025. the e-mail will be sent and received normally. 2.4 Short Message 140 english letters and 70 chinese characters can be sent into the customers’ mobile phones through the service center.
“sending failed, resending?”, the unsuccessful sending message will be saved in the inbox. If it succeed in sending a message, the phone will tell you that sending ; whether it is successful or not ,the collective sending will show you a result; the sent messages will be saved in the inbox. 2.4.2 Inbox while receiving a short message ,the phone will send a alert tone and save it into the inbox. And “ a short message” will appear on the screen to alert the customers.
5. “save number”: saving the phone number of the current message into the address(it is as the same as to create a new address ); 6. “move”: moving the message into the saved box; 7. “trash”: moving the message into the trash box. If the number is not trash through transferring the phone will tell the customers whether to set the number as a trash number or not. 8. “use number”: the customer will choose to save the number selected from message. 2.4.
4. “save”: saving the number in to the address (it is as the same as to create a new address); 5. “move”: moving the message into the saved box. 2.4.5 saved box the saved box is used to save the messages from other boxers. Edit, delete, call, save number and move can be used in the soft button alert area. 1. “edit” entering into the screen of editing messages and editing the message. 2. “delete”: deleting the current message and returning to the outbox(identifying whether to delete or not); 3.
1. service center number if providing the service ,the net agent provides SMS center number. 2. location you can select a location to save the message. When it is full ,the phone will change into another location. The phone will not inform you that the inbox is full unless the two locations are full. You can choose to use phone or the SIM first. 3. types of message you can choose SM, e-mail, voice and fax. 4.
the channel to decide to receive the messages from the channel. 2.5 MMS The MMS is composed of texts, pictures and voice. Due to the MMS(multimedia messaging service), the phone can receive and send pictures, sound and texts. Attention: MMS service works via your network administrator or service provider. This mobile phone supports receiving the maximum size of 50 KB. It will stop automatically receive the information if it is beyond limitation.
to send it , the phone will tell you to input the number Attention: 10 numbers are the maximum. 4. while inputting the subjects, you can directly press U or D on the editing screen (or use the touching pen to touch)to move the focus to select the subject. Then you can input the content and edit it. 5. you can insert pictures and music or edited text into the MMS message while editing the content. 6. while inserting pictures into the editing screen ,you can select the appending picture in the menu.
12. 13. 14. 15. inserting music, you can use the deleting music in the menu of the soft button area. if the customers want to send polypaged multimedia messages, you can choose the insert page in the menu of the soft button alert area. Then select to insert new pages to insert a page of a new MMS, and the procedure of the operation is as the same as the former one. You can also select deleting page ,pageup and pagedown to switch the pages.
when a MMS message is received, the mobile phone will give you a alert bell and store the message into the inbox. While in the waiting , the phone will tell you by a new frame and change the color of the icon. The number of the saving messages is dependent on the capacity of the phone. When you enter the inbox, you will find that all the received messages are stored in the inbox. And there is an icon of a little envelope before each message to indicate the status of the message.
number and moving. Play: playing the message automatically. Edit: editing the message Delete: deleting the current message and returning the outbox automatically. The phone will inform you whether to delete it or noe. Call: calling the numer Save: entering the address and storing the receiver’s number. Move: moving the message into the savedbox for the future use. 2.5.5 draft the draft is used to store the edited message. You can roll the selection bar to read the message.
receiver or sender number. Storing pictures: all the pictures in a MMS message will appear when you enter the stored pictures screen. And then you can store them in the index of the your resource. Storing music: all the music in a MMS 1. message will appear when you enter the stored music screen . and then you can store them in the index of your resource. 2. 2.5.7 MMS setting the address of gateway: connecting with beehive network and wanwei network/ MMS center: the address of the MMS service center.
downloading any the entertainment items, according to different types. You can get the exact bill from the explanation from the list of the entertainment. This service is 3. free of charge. (the operation above can be realized by the touching pen) 2.7 browser 4. the mobile phone has the function of GPRS. You can use the data calling to connect with the internet. You can also 5. browser the internet under the support of the GSM. And the world will have a close relationship with you.
Set-setting the browser Storing the netpage- showing the list, and adding the new one into it. Collection-showing the list ,and adding the new one into it. Returning-connecting with the main address. Dialing path-setting the configuration list and using them to connect with the net. Cutting off from the net-cutting off (the operations above can be realized by the touching pen) 2.7.2 downloading the data 1.
the net agent to get the setting information. 1) entering the window of the dialing path by pressing the dialing path in the menu of the soft key area. 2) Selecting a setting list and entering it. 3) Inputting the content of settings 4) After finishing it ,you can press left soft key (or touch the save on the soft key)to store settings. 5) You can quit without storing it by pressing the right soft key (or touch the return on the soft key) (the operations above can be realized by the touching pen) 2.
or L you can move the U,P,L,R to select the icon of flying mode. Pressing ok or left soft key , or to touch the quick function icon on the top to open or close the mode. It is effective when it is restarted. Opening the mode will not result in initialization. The functions in relation with the net, SIM card will exert nothing. Attention: though the functions can not be used, you should be careful to use this mode in the situation of commanding that the mobile phones should be powered off. 3.
6. 7. 8. 9. 10. 11. 12. 13. The compensation of exposal The accommodation of the screen’s brightness. The mode of night: selecting open or close. The size of the photos: setting the size MAX 1280*1024, L 640*480, M 320*240, Min 176*144 The storing location: you can store the photos in the mobile phone or in the SD card. UP/DOWN: you can touch the icon on the righttop to realize it. Pressing the 1-9,#* can also finish it.
tea, cold, reversal and blackwhite color. 3. the compensation of exposal 4. the size of the short film: L320*240, Min 176*144. 5. UP/DOWN: you can touch the icon on the righttop to realize it. Pressing the 1-9,#* can also finish it. 6. the storing location: you can store the films in the phone or in the SD card. 7. the preview of the films: you can press the mode key to switch among the modes of camera, preview of film, movie capture and preview of short film.
2. While playing you can use the L or R (or touch the control) to control the volume, and U to pause while D to continue. 3.3.4 deleting record files When you delete the files, you should delete them in the record profiles of the customer’s resource; if you want to delete them in the list of the record application, you should choose the delete on the soft key. if you delete the record, the one in the customer’s resource will disappear. 3.
from the phone, video and music will return to the phone. The line will not influence the operation of the fundamental functions, such as sending and receiving messages , picking up the call. The introduction of inserting the AV-lINE 1. when the mobile phone is not in the inserting screen, if you insert the line, the content will sill on the phone. 2. when the mobile phone is inserting screen, if you insert the line into the phone , the phone will become black. Meanwile, the TV will not play either.
choose the ‘play’in the ‘menu’ of the soft key tip zone. (or click the ‘play’on the screen with the touch pen.) 3.5.3 Move audio files To move the files in the play list, choose the ‘up’ and ‘down’ in the ‘menu’ of the soft key tip zone to move the chosen audio files up or down. 3. 5.4 Delete Audio Files To delete the files in the music list, choose the ‘delete’ of the ‘menu’of soft key tip zone to enter files list.
volume. 15. Press the key 1(on the right of the mobile) to play the previous file and press the key 2(on the left of the mobile) to play the next file. 3.5.6 The play formats supported by the audio player The audio player supports the following formats: mp3, amr, midi(mid), wav. The player can’t play the damaged files of the listed formats and will automatically delete them from the play list. 3. 5.7 Dialing and receiving calls during the playing of music files.
2. 3. 4. 5. 6. 7. list. ‘Reset’ click ‘reset’ to switch the cursor to the first picture. ‘Delete’ click ‘delete’ to delete all or part of the pictures.(or click the ‘delete’ icon at the upper right screen with the touch pen.) ‘wall paper’ open a picture, choose the ‘wall paper’ in the ‘menu’ of the soft key tip zone (or click the ‘wall paper’ icon at the bottom of the picture) to set the picture as a wall paper. ‘MMS’ press ‘mms’ to send the picture as an attachment of the MMS.
power key/call off key, home key to quit the TV mode and the screen will be bright again. Meanwhile, the original functions of CLR key, power key/call off key, home key will be resumed. d. At the TV browse mode, press MP3 key to quit the TV mode and black screen state, meanwhile the operation of MP3 will be stimulated. At the time, all your manipulations will be targeted to the MP3. The MP3 will be played through the TV track instead of the mobile track.
inappropriate formats viewed under the mobile browsing mode can’t be viewed on the TV. When pictures are viewed at the TV mode, if a motion picture or a picture of an inappropriate format is switched, the TV will not reveal the picture and the TV browse mode will be quitted. g. At the TV browse mode, the mobile will be at a black screen state. Click the shortcut item at the top of the screen and the operation of the shortcut can be stimulated.
with its drawing tools and all the functions under the ‘menu’ of the soft key tip zone. 3.8.1 Drawing tools 3.8.1 Tool window a. Frame Click the frame icon with the touch pen and then you can frame the picture at the picture-editing zone. b. Brush Click the brush icon with the touch pen and then you can draw or edit pictures. c. Eraser Click the eraser icon with the touch pen and then you can erase the parts you don’t want. d.
pen and the palette will be revealed at the picture-editing zone. b. Choose the color you need and click the chosen color with the touching pen; the chosen colour will be on the palette. c. Palette revealing The now foreground colour will be the colour you choose and the former foreground color will turn to the background colour. d. Switch icon Click the switch icon to switch the foreground and background colours. 3.8.1.3 The functions of items You can choose the following items at the soft key tip zone a.
the new catalog under the default folder. 3.9.2 Open files Certain operations will be stimulated according to the different types of the recognized files. E.g. the ‘audio player’ will be operated when a mp3 file is opened. Take the opening of the mp3 file under the recorder folder for example. First, enter ‘user’s information’ and move the cursor to ‘record’and press OK key (or click it with the touching pen) to enter the folder, where there are already some MP3 music.
with the touching pen) to finish the renaming process. 3.9.6 MMS sending Send the present picture as a MMS attachment 3.9.7 Email sending Send the present picture as an email attachment 3.9.8 UP Switch to the upper window of the ‘user’s information’ 3.9.9 Cut, copy and paste Cut or copy the present file and press ‘paste’ at under the target folder 3.9.10 property You can check the detailed information of the present file. 3.9.11 Manipulations related to the U(MMC) drive 1.
touching pen) and you can establish a new schedule. If there is already a record on the chosen date, press ‘ok’(or click it with the touching pen) to enter the schedule list. Then select ‘new’of the menu at the tip zone to establish a new schedule. Under the editing window, input the content for ‘topic’, ‘beginning time’, ‘end time’, ‘informing in advance’. Then, you can choose ‘save’in the menu of the soft key tip zone to save or press ‘send as message’or ‘send as email’ to send it after your editing.
tip zone to establish a new task. If there is no record in the task list, you can press the left soft key to establish a new task directly. Input the contents in ‘topic’, ‘begin’, ‘finish’, ‘person’and ‘content’, then choose ‘save’in the ‘menu’ of the soft key tip zone to save. Also, you can choose ‘send as a message’or ‘send as an email’in the ‘menu’of the soft key tip zone to send the task item you completed. 4.2.2 Search Choose ‘search’ in the menu of the soft key tip zone.
2. Specified size The mobile phone supports 16*16 and 24*24 font sizes, which can be switched freely. The default size is 16*16. 3. Choose background picture You can choose the pictures under the folders of the mobiles to be the background picture. 4、Choose the background colour You can choose different colours to be the background colour. 5、Choose the font colour You can change the font colours. 6. Set up auto-rolling You can set a screen rolling speed between 0-9999 mini-second 7.
4.4.4 Files management You can open and browse other files under other folders through ‘user’s information’ 4.5 Alarm clock At the alarm clock window, there are two sorts of alarm clocks; 3 repeating clocks and two one-off clocks. 4.5.1 Repeating alarm clocks Press up and down direction keys( or click with the touching pen) to choose the alarm clock to be edited and then press ‘ok’ key (or click twice with the touching pen) to enter the editing window. 1.
selection list from Monday to Sunday, press up and down direction key(or click with the touching pen) to choose the date for the alarm clock (single selection only). E.g. If you choose 14:00, open, Friday, then the alarm clock will ring at 2:00 pm on Friday. The clock set will be cleared after the ringing and will not ring again. 4.5.3 Off Alarm clock Choose the ‘off alarm clock’item, then set up the alarm time at ‘repeating clock’ and ‘one-off clock’item.
touching pen to see the previous (next) word’s translation. Press CLR key (or click ‘back’ key with the touching pen) to delete the input words or characters. 3. Press the right soft key (or click ‘quit’ with the touching pen) to quit the dictionary. 4.8 Data synchronization Through this function, the synchronization between the data in the Microsoft Outlook 2000 in PC and the data in the phonebook of the mobile can be achieved. 4.8.1 Preparation for synchronization 1.
5.1 JAVA You can download and update the program written by j2me software from web-sites through the java function of the mobile so that the expension of potential functions of the mobile can be ensured. Also, there are several default java programs for you to use. 5.1.2 Program Deletion Choose ‘deletion’ of ‘menu’ in the tip zone to delete the installed program. There will be tip window for confirmation. You can only click ‘yes’ to confirm the deletion and the ‘ok’ key cannot work. 5.1.
choose ‘management’ of the ‘menu’ and then choose ‘permission’ from ‘menu’ of the softkey tip zone to set permissions. 5.1.6 Download program At the JAVA window, you can press the right soft key( or click ‘setup’ in the soft key tip zone with the touching pen) to enter the program downloading window. You can download the programs only after inputing the correct web-address and connecting the mobile to the internet through dialing. Notice: 1. The local net support is needed during the downloading process.
to the shady area. The rules are: you can pull a box forward and you can’t pull the boxes against the wall or the boxes against the other boxes. 5.3.1.2 Manipulation 1. Choose ‘new game’in the ‘menu’of the soft key tip zone to restart the game. 2. Choose ‘back’in the ‘menu’of the soft key tip zone to cancel the previous step of moving, one click of ‘back’can help to cancel one step. 3. Choose ‘next mission’in the ‘menu’of the soft key tip zone to enter the next mission. 4.
4. Choose the ‘hint’ of the ‘menu’ of the soft key tip zone to reveal an ideal place for placing a piece. This function will help the beginners a lot. 5. Choose the ‘level’ of the ‘menu’ of the soft key tip zone to set your level. You can choose ‘beginner’, ‘medium player’and ‘advanced player’. 6. Press the right soft key (or click ‘quit’ of the soft key tip zone with the touching pen) to quit the game. 5.3.3 Huarong Route ‘Huarong Route’is a very ancient Chinese game.
that you will enter the next mission. 6. Choose the ‘choose mission’ from the ‘menu’ of the soft key tip zone to choose the mission you like. There are 6 missions: ‘five passes’, ‘siege’, ‘brave heart’, ‘fledge’, ‘Not far’ and ‘no escape’. 7. Choose the ‘ranking’ from the ‘menu’ of the soft key tip zone to see the highest score of each mission, that is, the fewest steps needed to get out of Huarong Route.
of the soft key tip zone to switch topic. 5.3.4.3 Rules for scoring. After entering the game, the score will be presented to the upper right corner. 1 score for the completion for one mission. On the upper left corner of the screen, the reference steps for passing the present mission will be presented. A completion of the mission will be 5 score. If you use fewer steps to finish the mission, each step you save will be one additional score.
and uncapitalized alphabets. Under the pinyin and the English inputing mode, the number key 1 will be a blank key, that is, if you press number key 1, there will be a blank left on the screen. The cursor will appear by a press on #, and you can move the cursor to locate the character you want by pressing the up and down directions keys. Press OK to confirm the character you choose. When you use the pinyin mode, the number key 2 to 9 will represent the letters and you can press them to spell the character.
restriction to the input content, e.g. the phonebook, the default input mode will be 123. According to the different inputing content, the writing input modes are divided into ‘Chinese’, ‘ABC-abc’, ’12,.’, “ @# ”、 “ ”. When you input the contents, if the content you want is already in the selection item, you can click it with the touching pen to add it to the editing frame. You can click to delete the input content.
catalog of the mobile more efficiently. 1. When the mobile is used as a USB drive, the PC can operate the files under the‘user’s information’and there will only an installation folder under the root catalog of the mobile. 2. If the mobile is not used as a USB drive, you can operate the ‘user’s information’on the mobile and PC can’t operate on it. 3.
Ⅴ Trouble Shooting Problem The display indicates that the phone is locked. No signal Remedy You need PIN code and PUK coke to unlock the phone. Contact your service provider. You lose connection with your Network Settings. Your location may be a blind area(like in a tunnel or between high-rises) or not covered by the Network Settings. Change your location and try again.
Flashing backlight and battery icon, prolonged beep and prompt “wrong accessory” You can not use the phone in a car before starting changing. Detach the charger from the phone and replace with a genuine one. A car may contain some metal parts that absorb electromagnetic wave and thus have an adverse effect on phone performance. Purchase a car kit to allow hand-free answer. Consult the local authorities about use of phones while driving.
No display of Send ID Not allowed to use a certain function Failure to send a Messages You can not removed, a full charged standby battery could stand up to seven hours. Remove the battery before your phone is turned off may lead to loss of information like Date and time too. This feature is Network Settings dependent. Contact your service provider. Many functions are Network Settings dependent. Contact your service provider. Messages feature is not available in all Network Settings.
SIM card uncorrected, the SIM card may be damaged. Contact your service provider.
ⅥSafety and General Information Exposure to RF Energy Your phone contains a transmitter and a receiver. When it is ON, it receives and transmits radio frequency (RF) energy. The transmission power of mobile phone can be controlled with the GSM Network Settings.
your ear. Avoid contact with antenna during a call. Do not use a phone the antenna of which is damaged. Touching a damaged antenna may cause slight burn. Ask a qualified technician or to replace the antenna for you. Use only genuine Haier parts. Avoid using your phone in areas of a weak signal, such as in tunnels or between high-rises. In these cased, the signal strength icon shows fewer bars than usual. Using non-Haier accessories may void the warranty.
battery short circuit. Do not fold or disassemble the battery. Do not throw the battery in fire or soak it in water. Responsibility User’s Responsibility Neglect may cause failure or injury. To avoid that, please read carefully the following safety precautions and keep people using your phone informed of them. To prevent any unauthorized use of your phone: Make sure your phone is put in a safe place and out of reach of children. Keep your PIN code in mind; do not write it down on pieces of paper.
drive. Always obey them. Consult the car manufacturer to ensure that electronic equipment used on your car is adequately shielded from electromagnetic interference. You are recommended to use a hand-free car kit specially designed for this purpose. Always give full attention to driving and to the road. The use of front light and horn as alert of incoming calls are prohibited in some countries. Check the laws and regulations on the use of phones in the area where you drive. Always obey them.
harmful to electronic element and battery, or cause distortion or deformation of the plastic parts. Do not attempt to repair the phone or its accessories by yourself. You can dial the hot line number of Haier when your phone cannot be operated normally. Always purchase and use Haier batteries and chargers. Protect the phone from dropping, impact, and violent vibration. Keep the phone and its accessories out of reach of children. Keep the phone dry. Do not clean the phone with chemical solvent or detergent.
