Owners Manual

49-5000255 9
ENGLISH
INSTALLATION INSTRUCTIONS
Combinations:
• This connection kit is used for super match indoor units
that are unconnected with other indoor units.
• This connection kit can match with MRV III-S, MRV III-C
systems.
• See the unit literature for a list of indoor units that are
compatible with your outdoor unit.
• See table 1 for capacity and quantity limitations of the
connection kit.
Table 1: Each Capacity of Connection Kit
Check List
Payclose attention to the following during installation. Check this list again before system commissioning and again after
completion.
1. Inspection items after installation
2. Inspection upon delivery
Connection Kit Each Capacity of indoor unit (kBtu/h) Quantity of indoor unit
MS1-036A Less than 36 (10.5kW) 1
MS3-036A Less than 36 (10.5kW) 3
Inspection Item Defect Inspection Column
Is the Installation of the connection kit secure? Falling off, vibration and noise
Leak tesr inspection is completed? Ne heating/cooling
Are all refrigerant lines insulated?
(refrigerant piping and tubing connections)
water leakage
Power supply voltage consistent with the
nameplate?
Out of service, burnt
All wiring and piping correct and secure? Out of service, burnt
Proper equipment and building ground? Danger in electric leakage
Wire size correct per electrical code? OIut of service, burnt
Inspection Item Inspection Column
Is the electric box cover installed?
All installation and equipment literature given to
the customer?