Owners Manual

49-5000255 5
ENGLISH
CAUTION
• The installed connection kit should be checked for
electricity leakage during commissioning.
• All refrigerant connections should be thoroughly checked
prior to concealment.
• All refrigerant lines connected to this kit should be
properly braced and secured.
• Condensate drains must be properly maintained and kept
clear. Water damage may result if drains are restricted
especially during periods of high humidity (over 80%). Air
filters must be maintained so as not to restrict air flow
through coils.
• Keep the connection kit and power supply wiring at least
4 feet away from television and radio (as well as antenna
wires and cables) to avoid image interference and noise.
• Television and radio interference is still possible under
certain circumstances depending on the radio frequencies
and conditions that exist.
• Avoid installing this equipment near florescent light
fixtures.
• Wireless devices such as controllers can be affected by
fluorescent light fixtures and operating ranges can be
limited.
Prohibitions
• Use only properly sized branch circuit protection, wire and
fuses. Improperly sized circuit protection or bypassing
circuit protection may cause personal injury or death and
also cause property damage including fire.
• Be sure to isolate electrical circuits to the equipment
while performing maintenance and cleaning.
• Do not install the connection kit near water heaters or
boilers. Water leakage or excessive moisture can cause
electrical damage.
SAFETY INFORMATION