User Guide

Example of programming a cooking

programme

3 minutes cooking/simmering with “Medium high”

(M.H) power level

ID CODE 050MWO

Appliance is in Stand-by mode

1. Open the appliance door and place the food on

the turntable inside.

2. Close the appliance door.

3. Turn the knob (5) clockwise to the right until the

mark (6) is in line with the M.H power level.

4. Turn the knob (4) clockwise until the indicator light

(1) lights up and the number of minutes “03” is

shown in the display (3).

The programme starts 2-3 seconds after the

cooking time stops being altered.

The remaining cooking time is continuously shown

in the display (3). (The clock counts down)

5. If required, the power level and the cooking time

can be altered while the appliance operates.

6. When the cooking programme is completed, the

figure “00” is shown in the display (3) and 5 short

beeps indicate the end of the programme.

7. Open the appliance door and take the cooked

food out of the appliance. (Use oven gloves)

8. After each programme end, turn the power level

knob (5) to the “Stop” position to prevent the

appliance from being inadvertently operated

without food, which can damage the appliance

9. Allow the food to rest at side briefly before

serving. It can thus cook inside a little more and

can cause burns if eaten immediately.