LE26K800/ LE32K800 LE37K800/ LE42K800 LE47K800/ LE55K800
Table of Contents Characteristic Functions………………………………………………………………………………1 Important Safety Instructions…………………………………………………………………………1 Technical Specifications………………………………………………………………………………3 The Technical Specifications for Final Product………………………………………………………3 Technical Specifications for TV…………………………………………………………………………5 VGA Display Mode………………………………………………………………………………………5 Power Management………………………………………………………………………………………5 Packing Listing……………………………………………………………………………………………5 Installation & Connection…………………………………
Characteristic Functions 1. LCD panel with no glint and low radiation can ease eyes' fatigue and protect eyes. 2. High-quality LCD with LED backlight panel is adopted with high brightness, high contrast, wide viewing angle, and super fast response time. Super fast response time can greatly eliminate the shadow of moving images. 3. TV/Monitor with two in one and multiple input ports can easily switch among the modes. 4. De-interlacing image disposal is adopted.
Important Safety Instructions ● The slots on the case is designed to release heat so as to assure that all inside components will not reach an extra high temperature and can work normally for a long time. Please do not cover the holes while place it. ● Unless there is good ventilation installation, please do not put this machine in inlaid device. ● Please do not place it on an unstable position so as to avoid falling off.
Important Safety Instructions ● Please do not use the machine immediately when moving the machine from low temperature place to high temperature one, or install and use at the place of facing air conditioning, otherwise it may cause the condensation in the machine, to cause fault. ● Must be careful when moving this machine, avoiding being struck, especially pay attention to protect the screen part.
Technical Specifications Panel size 37" Max. Resolution 1920×1080 Best Resolution 1920×1080@60Hz Pixel Pitch 0.42675mm×0.42675mm Active Area 819.36mm×460.89mm Color 1.06 Billion Power Supply 100V-240VAC 60/50Hz Power Consumption of Speaker 8W+8W Excluding base Dimension (L×H×W) and Weight Including base Panel size 42" Unpacking: 898×572×47mm Net Weight: 11.0Kg Packing: 1000×680×135mm Gross Weight: 13.5Kg Unpacking: 898×624×47mm Net Weight: 12.
Technical Specifications Panel size 55" Max. Resolution 1920×1080 Best Resolution 1920×1080@60Hz Pixel Pitch 0.63mm×0.63mm Active Area 1209.6mm×680.4mm Color 1.06 Billion Power Supply 100V-240VAC 60/50Hz Power Consumption of Speaker 8W+8W Dimension (L×H×W) and Weight Excluding base Net Weight: 22.0Kg Packing: 1470×975×205mm Gross Weight: 27.
Installation & Connection Base Assembly Installation Fasten the base supporting cover to the back cover of machine (It needn't to operate this step when base support cover had been installed.), and then Insert base assembly to supporting shield hole of complete machine back cover as illustrated direction of arrow, to make supporting shield and supporting hole center in the same line, finally fasten the screw.
Installation & Connection Power Connection Plug one end of the power cord into the input port of the machine's power supply and then insert the other end into the socket of the electrical source (AC 100V-240V, 60/50Hz). Notes: 1. When connecting the power cord, be sure to turn off the machine and other equipment's power. 2. If a long time at leisure, please disconnect it from power supply 3. This TV must be connected to a three pin socket outlet for safety.
Position of Control Keys 3 4 5 6 7 1 2 1) 2) 3) 4) Remote Receiving Sensor. Power Indicator. SOURCE: Press this key to enter the menu of signal source and choose signal source. CH+/CH-: Press these two keys to select the channel, and adjust the options you need under OSD operation. 5) VOL+/VOL-: Press these two keys to add or reduce volume, and adjust the analog value under OSD operation. 6) MENU: Press this key to enter main menu. 7) Power switch .
Remote Control Telecontrol battery installation method Take off the cover of battery box, fix two AAA batteries with 1.5 volt, and conform with the polarity of remote control battery box. Note: Appearance of the remote control may be different from this picture, please according to practicality. Precautions for use of remote control 1. When using remote control you should point it to the remote-control inductive window. The goods between remote control and inductive window may hinder normal operation. 2.
Basic Operation Instruction Menu Operation Instruction Press ''MENU'' key on the remote control or on the control panel. The TV will display the main menu. 1. Press ''Left/Right'' key on the remote control or ''VOL+/ Picture Mode Soft VOL-''key on the control panel to select the adjustment 48 Contrast Brightness 48 sort menu, which includes 4 sorts: PICTURE, SOUND, Saturation 50 OSD, TV. Hue 50 Sharpness 55 2.
Basic Operation Instruction Option Aspect Ratio Color Temp Noise Reduction Function Select picture scale Select color temperature mode of the picture Select model of 3D NR Description "Full, "4:3", "Subtitle","Film" four modes There are three Color Temperature modes, "Standard", "Warm", "Cool ". "Middle", "High", "Off", "Low". SOUND Select to enter the SOUND submenu. Press "Up/Down" key on the remote controlor the key "CH+/CH-" on the control panel to choose what you need.
Basic Operation Instruction TV Select to enter the TV submenu. Press "Up/Down" key on the remote control or "CH+/CH-" key on the control panel to choose what you need. Press the "Left/Right" key on the remote control or the "VOL+/VOL-" key on the control panel to adjust analog value or state Color System PAL (see below table).
Basic Operation Instruction Delete: Press ''Up/Down'' key on the remote control to select channel which you wish delete. Press "1" key on the remote control, press "MENU" key to return . Move: After select channel, press "2" key on the remote control, then press ''Up/Down'' key on the remote control to select position where you wish place, then press "MENU" key on the remote control to return.
Basic Operation Instruction nonstandard USB storage devices, may appear condition of unable recognize, please replace the standard USB storage device. ② Streaming media system to play a file for each format has certain limitations, if more than the system limit, then play will be wrong ③ Do not pull up USB storage devices when system playing, this may result in system or equipment problems ④ The system supports USB1.1 and USB2.
Basic Operation Instruction Music: Press "Left/Right" key on the remote control to select this function, press "OK" key to play background music.(Musics and photos need to place in the identical folder, or you may select some music in music file first.) Playlist: Press "Left/Right" key on the remote control to select this function, press "OK" key to show playlist. Info. : Press "Left/Right" key on the remote control to select this function, press "OK" key to show the information of photo.
Simple Troubleshooting Symptom Factor Snowflake speckle and sound noise. 1.Antenna cable connector is loose, cable is damaged. 2.Channel setting is incorrect. 3.Antenna cable type is not matching. 4.Direction or position of antenna cable is incorrect. 5.Signal is weak. 1.Check the antenna cable connector plug whether or not loose, cable whether or not perfect. 2.Refer to channel setting method, resetting again. 3.Check antenna cable type(VHF/UHF) 4.Adjust direction or position of antenna cable . 5.
