OWNER’S MANUAL L26F6/L32F6/L42F6 TFT-LCD TELEVISION Please READ this manual carefully before operating your TV, and retain it for future reference.
Contents Contents Warning 3 Important Safety Instructions 4 Panel Control and Rear Terminals Control 6 Panel Control........................................................ 6 Rear Terminals Control......................................... 6 Remote Control 7 Battery loading..................................................... 7 Precautions........................................................... 7 Remote Control Function 8 Function introduction..........................................
Warning Warning WARNING: ! WARNING RISK ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. * To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing. * lf necessary, please contact authorized after-sales services.
Important Safety Instructions Important Safety Instructions 4 LCD television Owner’s Manual
Important Safety Instructions LCD television Owner’s Manual 5
Panel Control and Rear Terminals Control Panel Control and Rear Terminals Control - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV.
Remote Control Remote Control Battery loading 1. Slide open the cover of the battery compartment on the back of the remote controller. 2. Load two 7# (AAA) alkaline batteries in the compartment, (plus and minus poles to respective mark) 3. Replace the cover of the battery compartment. Precautions As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect.
Remote Control Function Remote Control Function - The remote control cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction 5 HDMI 6 Sound Mode 7 ARC Press this key to start TV from standby mode, press it again to return to standby mode. It is only available in TV mode. Press this key continuously to select the picture mode.
External Equipment Connections External Equipment Connections Antenna Connection - Antenna or Cable Service without a Cable Box Connections. - For optimum picture quality, adjust antenna direction if needed. Note: * It is recommended that you'd better use 75Ω coaxial cable to remove the disturbance caused by airwave. * Don't bind antenna cable and electric wire together. To improve picture quality in a poor signal area, purchase and install a signal amplifier. ANT.
External Equipment Connections Choose Your Connection button to confirm. select the source, press the There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of someways to connect your TV. Choose the connection which is best for you. VCR Connection DVD Setup How to connect A VGA IN IN To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
VGA IN available. Then, make the corresponding audio connections. IN External Equipment Connections Y How to use Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) B Use SOURCE on the remote contralto select PC or HDMI (Y, Pb/Cb, Pr/Cr) mode. C Press Play button on external equipment for program play.
External Equipment Connections / Basic Receiving and Playing Operations RR When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. In the manual, the OSD (on screen display) may be different from your TV’s because it is just an example to help you with the TV operation. Power source Switching ON/OFF the TV set TO USE AC POWER SOURCE A First, connect power cord correctly and the power indicator will light.
Basic Receiving and Playing Operations to confirm the switching to TV input terminal. After switching, the signal source menu disappears, and at the upper right corner of screen displays the information of current signal source. Pressing this key repeatedly can exit from the signal source menu. In case of no other operation, the signal source menu will automatically disappear upon reaching the OSD disappearance time preset in the main menu. option, and then press OK to enter submenu.
Basic Receiving and Playing Operations If you want to recover the skipped channel 1. Use Direct-digit Choosing button to select the number of the channel to be recovered. 2. Do the above steps again. Exchange A 3. Press3/4to set Skip as Off. B Automatic search A C Press MENU on the remote control to display main / to select Tuning menu, and then press menu. Press MENU on the remote control unit or MENU on the TV’s front panel to display main menu, and then press / to select Tuning menu.
Basic Receiving and Playing Operations the TV set to adjust the volume level. The range is 0~100. When the volume buttons are pressed the volume level is displayed automatically on the TV screen. Mute Setting A B Press MUTE button on the remote control and a icon will display on the screen. At this time, the sound of the TV set is turned off. Due to different TV signal inputs, some items may need to be adjusted. The following makes a description by only taking TV signal as an example.
Basic Receiving and Playing Operations ❖❖ Reset ❖❖ Contrast Return to factory default settings. Press 3/4to select OK or Cancel, Press OK to affirmance. This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged. ❖❖ Brightness Palette Reset This will adjust the light output of the complete picture, which will mainly affect the darker areas of the picture.
Basic Receiving and Playing Operations How to customize your own Sound status A Press MENU to display main menu on the screen, and then press / to select the Sound menu, afterwards press OK/4 to enter the option to be adjusted. B Press / to select the option to be adjust. and then press 3/4 to adjust it. 56 56 ❖❖ Surround The surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV’s speakers. Press 3/4 to select On or Off.
Basic Receiving and Playing Operations Timer Functions Setting of Current Time The current time is calculated from the moment upon turning the TV on. At first, check whether the time indicated on the TV's clock is consistent with the standard time of your time zone; if not, adjust the clock as follows: A C Press MENU on the remote control unit or MENU on the TV’s front panel to display the main menu, and then press / to select the Timer menu, afterwards press / to select the Current Time option.
Basic Receiving and Playing Operations A Press MENU on the remote control unit or MENU on the TV's front panel to display the main menu, and then press / to select the Timer menu, afterwards press / to select the Remind Time option. ❖❖ OSD Menu Press OK to enter the setting screen, and then press / to select ON or OFF, if you select ON, press 3/4 to set hour and minute, and then press / to adjust time. ❖❖ PIP 56 56 B 56 56 C After finishing time setting, press OK or MENU to confirm.
Basic Receiving and Playing Operations ❖❖ DSM Press 3/4 to set Demo Off/Demo I/Demo II. ❖❖ Background Press 3/4 to set ON or OFF, if you select ON, the TV screen will be blue background if no signals are available. Adjust Menu The TV can be used as a display, and you may adjust relevant settings. Press SOURCE to switch the signal input to PC mode. A ❖❖ Black Stretch Press 3/4 to set ON or OFF, if you select ON, the TV picture in black area will be enhanced.
Basic Receiving and Playing Operations How to use the password function Press H. LOCK, the TV screen will display Enter Password to prompt the user to enter a correct password by pressing corresponding numerical keys; if the password is correct, the user enters the Lock Set menu; if incorrect, the user is required to enter a password again. If there is no operation for a few seconds, the display will automatically disappear.
Maintenance/Troubleshooting 56 Press / to select the Unlock option, and then press 4 to clear all the lock settings, namely set all the lock setting options as OFF; the Preset Channel is set as OFF and max volume returns to 100 (except password). ❖❖ I2C Bus A Press SOURCE on the remote control unit to select USB option. B Insert USB equipment into corresponding USB interface 2s after starting the system.
Specification/Formatl RR You can choose the photos or music in different files to play together. A After entering USB main interface, press 3/4 to select MUSIC item. B Press OK to confirm the selection and enter the music file list. C Press 5/6 and OK button to select the music you want to play, then press OK button to play the music. Press / to achieve the REV (fast back) and FWD (fast forward) of the music being played. Press / to select the last or next music.
Specification/Format Maintenance Maintenance Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. C D Press 3/4 and OK button to select the text you want to play, and then press OK button to play the text. Cleaning the Screen A Here’s a great way to keep the dust off your screen for a while.
Specification/Formatl No picture, no sound Problem Turn onthe power supply; Properly plug theTV setto the powersocket; Check to see if the power cable of other appliance is plugged in the TV set. Make sure that the power cable of the TV set is properly connected. Possible remedies Good picture, no sound Depress the volume button; Check out theaudio frequency input signals.
Maintenance / Troubleshooting/Specification Note RR Design and specifications are subject to change without notice. The dimension in this manual is a approximation. Format Recommendatory HDTV/ SDTV(YPbPr/YCbCr) format Sequence Number Format Refresh Frequency (Hz) 1 480i/480p 60 2 576i/576p 50 3 720p 50/60 4 1080i/1080p 50/60 Recommendation PC connection input format sequence number Format H-Frequency (KHz) V-Frequency (Hz) 1 640*480@60Hz 31.5 60 2 800*600@60Hz 37.
Specification / Format LCD television Owner’s Manual 27
