Model # IPDS-10 iPod / iPhone Rotational Docking Station USER MANUAL
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ......................................................................................2 PREPARATION FOR USE ............................................................................................................4 USING THE AC ADAPTOR ...........................................................................................................4 CONNECTING EXTERNAL DEVICES ........................................................................................
IMPORTANT SAFETY INSTRUCTIONS 1.) Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings. 2.) Install this unit in accordance with the manufacturer’s instructions. 3.) Only use attachments / accessories specified by the manufacturer. 4.) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the unit. When a cart is used, use caution when moving the cart/unit combination to avoid injury from tip-over. 5.
IMPORTANT SAFETY INSTRUCTIONS 21.) Do not destruct the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 22.
PREPARATION FOR USE Contents: 1 x Main Unit, 1 x Remote control, 1 x Instruction manual, 1 x Main adaptor, 4 x iPod inserts Unpacking And Set Up • Remove the contens from the box and remove all packing material from the main unit. We recommend that you save the box & packing material in the event that the unit ever needs to be returned for service. • Remove any descriptive labels or stickers from the top or front panels of the unit but do not remove any labels or stickers from the back or bottom panels.
CONNECTING EXTERANL DEVICES Auxiliary Input Jack This system include a auxiliary input on the back cabinet labeled “AUX IN”. The input allow you to connect external audio sources and play the audio through the speakers of the system. You may find it convenient to connect equipment use occasionally(such as iPod shuffle or another Mp3 player). Complete the connections as shown below: • AUX connection requires a 3.
LOCATION OF CONTROLS & INDICATORS 1 2 3 4 5 COMPONENT VIDEO OUT Pb Y Pr DC IN 8.5V AUX IN 6 7 1. 2. POWER ON/OFF/PLAY/PAUSE Button ROTATE Button 3. Universal Dock for iPod/iPhone 4. 5. VOLUME - Button VOLUME + Button 6. COMPONENT VIDEO OUT Pb Jack 7. COMPONENT VIDEO OUT Y Jack 8. COMPONENT VIDEO OUT Pr Jack 9. DC IN Jack 10.
REMOTE CONTROL 1 1. Remote Control Transmitter 2 10 2. Power Button 3. iPod MENU + Button 3 4 4. SKIP 11 5 6 Button 5. ENTER Button 6. iPod MENU - Button 7. PLAY / PAUSE 7 12 8 13 9 14 Button 8. VIDEO OUT Button 9. VOLUME Button 10. ROTATE Button 11. SKIP Button 12. MENU Button 13. 3D SOUND Button 14. VOLUME Button PULL Using The Remote Control The CR2032 lithium battery is already installed in the remote control.
OPERATING INSTRUCTIONS General Controls Most of the main functions of this system can be operated by the controls on the top panel of the main unit, or by the buttons on the remote control. If a specific function can only be operated by the remote control, or by the top panel controls, this will be clearly indicated in the instructions.
iPod/iPhone OPERATION Charging your iPod / iPhone NOTE: Please make sure you are using the correct insert from your iPod / iPhone and that it is properly docked into this unit. FAILURE TO DO SO MAY DAMAGE THE iPod / iPhone. When an iPod / iPhone is inserted into the dock, it will go to standby mode then turn off. While the iPod / iPhone is docked in the system, it will recharge (until fully charged).
iPod/iPhone OPERATION CONTROLS + / - (Plug/Minus)buttons(on Remote Control Only) - After pressing the MENU button to access the iPod/iPhone Menu, press the + / - buttons to move up(+) or down(-) within the Menu display. ENTER button(Remote Control Only) - After selecting the desired Genre, Album, Song, etc in the Menu display with the + or - buttons, press the ENTER button to Enter (Open) that Genre, Album, or begin playback of the selected song.
VIDEO OPERATION Connecting the Video Cord to View a Video/Picture from iPod/iPhone When viewing a video/picture from iPod/iPhone on your TV, use a component video cord (not supplied) to connect the COMPONENT VIDEO OUT jack on the unit and the component video input on your TV. • After you have connected the unit, change the video input mode on your TV. For details, also refer to the insrtuction manual for your TV. The below diagram show the connection options available.
TROUBLESHOOTING GUIDE Symptom Possible Cause Soluti on iPod Player Unit does not respond AC adaptor is not plugged into a wall outlet or the connector is not (no power) plugged into the DC IN jack on the back of the unit. iPod does not dock properly iPod does not respond to the unit Plug the AC adaptor into a wall outlet and plug the connector into the DC IN jack on the unit. Using no or wrong iPod insert Make sure the dock insert is the proper fit for the iPod.
MAINTENANCE Cleaning The Unit • To prevent fire or shock hazard, disconnect your unit from the main power source when cleaning. • If the cabinet becomes dusty wipe it with a soft dry cloth. Do not use any wax or polish sprays on the cabinet. • If the cabinet becomes dirty or smudged with fingerprints, it may be cleaned with a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes, which will damage the finish of your unit.
DOCK ADAPTOR / APPLE DEVICE COMPATIBILITY CHART iPhone A iPhone, iPhone 3G, iPhone 3GS, iPod classic(1st/2nd generation), iPod video(5th generation) iPod photo, iPod 4th generation, iPod mini, iPhone 4 B iPhone 4 iPod touch C iPod Touch(1st / 2nd generation) iPod nano(1st / 2nd / 3rd generation) 5G nano iPod nano(4th / 5th generation) D 4G nano 14
APPLE DEVICE COMPATIBILITY CHART iPod mini 4GB 6GB iPod 4th generation 20GB 40GB iPod 4th generation (color display) 20GB 30GB 40GB 60GB iPod 5th generation(video) 30GB 60GB 80GB iPod nano 1st generation 1GB 2GB 4GB iPod nano 2nd generation (aluminum) 2GB 4GB 8GB iPod nano 3rd generation(video) 4GB 8GB iPod nano 4th generation(video) 5th generation (video camera) 8GB 16GB iPod nano 6th generation 8GB 16GB iPod classic 80GB 160GB iPod classic 2nd generation 120GB iPod touch 4th generation 8GB 32G
WARRANTY This Haier brand product, when shipped in its original container, will be free from defective workmanship and Materials, and agrees that it will, at its option, either repair the defect or replace the defective product with a New or re-manufactured equivalent at no change to the purchaser, for parts or labor for the periods set forth Below: This warranty does not apply to the appearance of the product or the exterior of the product, which has been Damaged or defaced, altered or modified in design o
