User Manual

ManualsBrandshaier ManualsWashersHWM-6.5/S

Even there's no water in the tub, the

spinning will start after a certain period.

Do not use soak process for woolen laundries

Wash the laundries that are prone to lose

color separately from other laundries.

The pulsator will not rotate unless the

water is filled to selected water level.

Selection method of the procedure programs

Attention

If you push the "PROCEDURE SELECTION" button for 6 times, it will resume the

original mode, and it will circulate like that.

If you select the"QUICK WASH" program, you have to set the full procedure of

wash, rinse and spin. The procedure can not be selected.

Times of pushing

the"select"button

Applicable procedure

Contents(the lighted indicators

indicate the programs about to run)

Spin(spin after drain)

Wash(the washing

liquid remains in the

tub)

When the common laundries

need washing, rinsing and

spinning.

Soak Wash Rinse Spin

Repeat using the washing

liquid

When the laundries need

rinsing and spinning after

manual washing

When the laundries need only

spinning after manual

washing (first drain then spin)

If the laundries are very dirty,

or the sleeve and collar are

dirty, first soak then wash

Wash, rinse, spin

Rinse,spin

Wash,rinse(the

rinsing liquid remains

in the tub)

Soak,wash,rinse,spin

The laundry needn't spin to

avoid wrinkles

Selected procedure

program

3 Press the button of "PROCEDURE SELECTION"

to select suitable processes.

After the power is switched on, the washing machine will automatically

set a normal program comprising of processes of "Wash, Rinse and Spin" .

If other program is desired, press the button of "Process" to select one

or several process of soak, wash, rinse and spin. Refer to the

paragraph "Processes selecting".

PROCEDURE

SELECTION

Page 10