User Manual HWF80BW2 HWF85BW1
Elements Thanks for purchasing a Haier Product ons carefully before using this appliance. The ins ons contain Please read these in important informa on which will help you get the best out of the appliance and ensure safe and proper installa on, use and maintenance. Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
Index ................................................................................................................................................. 3 re e ............................................................................................................................................... 5 .................................................................................................................................................8 e ............................... .........................
This appliance is not intended for use by persons (including children) with reduced physical, !" #$%&#$&'!"()*&+),)-.*./! 0&#$&*)+1&!3,!$.!"+!&)"4&1"#5*!46!0&7"*! &(8!%&8)9!&-!!"& 6.9!"& 7,!$9. .#"&#$&." ($7+/#"&+#"+!$"."6&7 !&(8!&),,*.)"+!&-%&)&,!$ #"&$! ,#" .-*!&2#$& their safety. Children should be supervised to ensure that they do not play with the appliance. Do… Make sure that the transport bolt is removed. Use a separate earthed socket for the power supply.
During daily use of the appliance Do… loose threads to prevent the items from being entangled. If necessary, put small items into a small bag or net electricity, and for safety. Wipe clean the lower part of the porthole. odors. Let the power cord be replaced by the manufacturer, his service agent or other accordingly , in case it is damaged. Use the hose-set supplied with the appliance.Old hose-sets should not be reused. Do not… Touch the washer door during the washing process, it gets hot.
Before Use Before Use Descrip on This diagram may be slightly purchased. nt from the layout of the washing machine you have just Drain hose Control panel Water inlet valve Door handle Power cord Work top Back cover screws Start/Pause Back cover Washer door Filter cover T3 S4 S2 T2 T1 S3 Preparing the machine Remove all the packing materials to prevent unsteadiness, including the polystyrene base. Upon opening the package, water drops may bee bag and the porthole.
Before Use In on They are used for (&)*+",- !"+./"012.#!/"3124 15,67"8/0-9/"+./":-*5"625/ 6";$%*5/"(&< upright. Dismantle the transport 3. 2. 1. on bolts The transpo on bolts are designed for clamping an vib on components inside of the washing machine during the transpo on process. Remove the back cover. Remove the four bolts on the rear side and take out Replace the back cover. Fill the holes le by the bolts with blanking plugs.
Inlet Hose Connect the nut on the inlet hose to the connector on the water valve. Connect inlet hose to a water tap with cold, fresh water. Use the hose-set supplied with the appliance. Old hose-sets should not be reused. Drain Hose Use the drain hose bracket to keep the end of the of drain hose retained and prevents the water. Don't extend the length of the drain hose; if an extended hose is required, please consult a serviceman or plumber. The height of the drainage outlet must be 80-100 cm.
ons Control Panel 0 1 NDC %8*M -.//0$K. 4 5 6 7 8 9 1 1. 2. !" #$$%&'(! 3. Progra)$*+al$ 4. Was,$Temp$ 5. -.+!$-.//0$ $ $ Oper onal Func ons Nº Func on 1 Detergent drawer 2 3 6. 7. 12345$6+!7e $ 8. */95: 9. 10. 81*$*+7.lay$ Explica on ./!$3,/$0rawer;$3,r//$compartmen37$c5!$=$?rew57,$0/tergent Compartmen3$@=$*/tergen3$f(4$.rogr5)7$>$t($>AB 2 1 H(4$3,/$J54+(&7$F57,+!C$3/)./453&4/7,$.l/57/$4/H/4$3($3,/$ )5!&59$(H$0/3/4C/!3B K7/$8(F$-&07+!C$(4$L4(!3$8(50/4$ .
7 Extra Rinse disappears when the extra rinse ends. 1-15 are used. 8 Delay the washing machine will start the wash program directly. 9 Start/Pause When the washing machine is connected to the power socket and a screen start blinking, press the Power switch, the program will be cancelled. 10 LED Display accordingly.
ons Program Modes 7$$$=#3#"E#,3$(2C1&"3C#,3$%2"$1"#.&)G$C2-# 2 1 P "oE"&CCe n Temp. $$$$$$$F"#)#3 Max 90° C 30°C 60°C 30°C 3 Mix 60°C 30°C 4 Wool 40°C --- *$$+,-#" wea" 60°C /$$012"3 c 2 3 1 8$$$=#3#"E#,3$(2C1&"3C#,3 $$$$$6'!"e Type F"#)#3 Spin Speed h Chemical !"#$%&!"'() 7ABB$"1C 78BB$"1C 7BBB$"1C Woolen %&!"'() $DBB$"1C 40°C +,-#".
Program Max Load Temp. Washing Time 8 kg / 8.5 kg 30°C Auto Synthe c 4 kg / 4.5 kg 30°C Auto Mix Wool 30°C Auto Under wear 4 kg / 4.5 kg 2 kg / 2 kg 4 kg / 4.5 kg --40°C 0:48 h 1:03 h Sport 4 kg / 4.5 kg 20°C 0:25 h Jeans 4 kg / 4.5 kg 2 kg / 2 kg 30°C 1:12 h 90°C 40°C 2:06 h 1:00 h --- 0:15 h 30°C 0:51 h 1:30 h 0:41 h HWF80BW2/HWF85BW1 Hygienic Fast Express 15 4 kg / 4.5 kg 2 kg / 2 kg Baby Care 4 kg / 4.5 kg 4 kg / 4.5 kg Delicate 4 kg / 4.
Washing Methods the machine is use for commercial purpose the guarantee will not be valid anymore. Do not use it for purposes other than that for which on the label of each garment and wash only machine-washable garments. Power Supply Connect the washing machine to the power supply (220V to 240V~/50Hz). Turn on the tap. The water must be clean and clear. Before use, check for leaks in the joints between the tap and the inlet hose by turning on the tap.
ons Loading the appliance Open the washer door put in the laundry piece by piece. Close the door ghtly. using the washing machine, let it run unloaded for one program to prevent the laundry from being tainted by oil or dirty water from the washing machine. Before washing you should run the machine, but with detergent, with 60°C program. Do not overload the washing machine.Note !"#$%&"'"( #)*+%),) 34*$#*004'$%(9# 4#.'49'*))"/5:,3"#47# !,)1#74'#)*+%),)#34*$;# -"".#/%+#%(0!"/#1" 2""(#34*$#*($#$',)# 4.
ons Sele ng program To get the best washing results, an appropriate washing program should be selected according to the laundry type. Please turn the program knob to select the right program. 8kg Sele ng fun on Select the required op ons. (Refer to the "Control panel" pages 8,9 and 10) Se ng washing temperature Press and hold down the temperature bu on un he desired temperature is selected. Se ng spin speed Press and hold down the speed bu on un e desired speed is selected.
Care Chart Machine Wash, COLD Machine Wash, WARM Machine Wash, HOT Machine Wash,COLD Permanent Press Machine Wash,WARM Permanent Press Machine Wash,HOT Permanent Press Machine Wash,COLD Gentle Cycle Machine Wash,WARM Gentle Cycle Machine Wash,HOT Gentle Cycle Hand Wash Tumble Dry,NO HEAT Do Not Wash Tumble Dry,LOW HEAT Do Not Tumble Dry Line Dry Bleach as needed Any bleach, like Clorox® , may be safely used Tumble Dry,MEDIUM Drip Dry Tumble Dry,HIGH Dry Flat Non-chlorine Bleach as needed Use only
Maintenance Cleaning and Care A er washing Turn o the water supply and remove the electrical plug each wash. Open the washer door to prevent form on of moisture and odors. If the washing machine is idle for a long period, drain the water in the machine and replace the drain hose. Cleaning the detergent drawer Take always care there are no detergent residues. Clean the drawer regularly : 1. 2. Press 3. insert the drawer back in the appliance.
Maintenance r Water inlet valve and inlet valve To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet valve and inlet valve regularly. Moving the machine Remove the back cover. Remove the blanking plugs. Tighten the bolts with a spanner. Replace the back cover. Long periods of disuse Display Codes Codes Causes !"#$%&'"%()*(%+!ter and check the drain hose contact the maintenance personnel. Shut the door properly, and then press the CLr FLtr 6 minutes.
Maintenance F7 E8 FA FC1 Motor Error Contact the maintenance personnel. Contact the maintenance personnel. Contact the maintenance personnel. Contact the maintenance personnel. Water level sensor error. board and motor Contact the maintenance personnel. FC2 board and power board End End of wash cycle. 19:30 1:25 UNb 1.In case washing 1 piece of laundry(carpet, bed sheet,table sheet,ect) make it weight is greater than allowable maximum, symmetrical inside the drum.
Trouble-Shoo ng Trouble-Sho Problem Washing machine fails to operate. Washing machine c with water. Machine is draining while being Drainage failure. Causes Solu ons Power failure. The washer door is not properly closed. Machine has not been switched on. Check the power supply. Close the washer door properly. Make sure the machine is switched on. Water tap is not turned on. Water pressure is less than 0,03 MPa. The inlet hose is kinked. Water supply failure. The program knob is not properly set.
Technical data Basic technical informa on regarding the appliance. HWF80BW2/HWF85BW1 Power source Max. working current (A) Water pressure (MPa) Nominal load (kg) Spinning speed (r/min) Washing programs Max power (W) Dimensions (HxDxW mm) Net weight (kg) 220 - 240V~/50Hz 10 ! "#$%#1 8.0/8.
not solved. Please check the Warranty Card included in the product.
0020507792AD
