User Manual Washing Machine DIRECT MOTION STEAM PLUS 12kg Steam HWF12D1W1
3 Index Thank you for purchasing a Haier product Safety....................................................................................................4-5 Please read these instructions carefully before using this appliance. It contains important information which will help you get the best out of your appliance and ensure safe and proper installation, use, care and cleaning. Keep this manual in a convenient place so you can always refer to it for safe and proper use.
Safety 4 This appliance is intended to be used in household and similar applications such as: ... staff kitchen areas in shops, offices and other working environments; ... farm houses; ... by clients in hotels, motels and other residential type environments; ... bed and breakfast type environments; ... areas for communal use in blocks of flats or in launderettes. 5 During daily use of the appliance...
Production description 6 Installation Preparation DIRECT MOTION STEAM PLUS Remove all packaging material including polystyrene base. While opening the package, water drops may be seen on plastic bag and porthole. This is normal as a result from water tests and quality control in the factory. 12kg Steam R7 R8 R5 R6 S1 S2 I1 Note: Packaging disposal: Keep all packaging material out of children’s reach and dispose them in an environmentally friendly manner.
Installation 8 Control panel 9 Inlet hose 1. Connect inlet hose to the machine water inlet valve . 2. Connect inlet hose to a water tap. 3. Tighten inlet hose connections and turn on water supply. Check for any water leaks. Stop all water leaks before continuing with installation. DIRECT MOTION STEAM PLUS 30 12kg Steam Warning! Appliance is only qualified for cold water supply! Use the hose-set supplied with the appliance. Old hose-sets should not be reused.
Control panel-function buttons 10 Display symbols-Control panel “Steam” (button f) To get best results in each programme Haier has well defined specific default settings. If there is no special requirement, default settings are recommended. Accordingly to these factory settings many programme parameters and additional functions could be individually changed.
Programmes 12 Programme table 1. Washing powder compartment 2. Detergent compartment 3. Softener compartment Programme Temp. Preset 1 2 3 Fibre Type Preset 1. Cotton 0-90 30 Cotton/Synth. 1000rpm 2. Eco 0-90 30 Cotton/Synth. 1000rpm 3. Towels 0-90 60 Towels 1000rpm 4. Allergy 0-90 60 Cotton/Synth. 1000rpm 5. Baby Care 0-90 40 Cotton/Synth. 1000rpm Consumption 13 The indicated consumption values may differ in local conditions. Max load kg 1. Cotton 12 2 30 Auto 2.
Daily use 14 This appliance is only for domestic use inside the house. If it is used for commercial, industrial or not intended purposes any Haier guarantee will not be valid anymore. Consider instructions on each garment label and wash only machine-washable laundr y. 15 'DLO\ XVH /RDGLQJ WKH DSSOLDQFH Open the door and put in the laundry piece by piece. Close the door carefully. Don‘t overload. Check if you can put a hand upright on top of load. 3RZHU VXSSO\ Connect the washing machine to the power s
Daily use 16 Add individual selections Select required options and settings refer to “Control panel”. Steam Start wash programme Touch “START/PAUSE” button to start. Appliance operates according to selected settings. Changes are only possible by cancelling wash programme. General information and tips: 1. For safety reasons the door is locked partially during the washing cycle.
Care and cleaning 18 19 Care and cleaning Cleaning the detergent drawer 1. Turn off and unplug the machine. Clean the drawer from detergent residues regularly. Pull out the drawer until it stops (1) and press the release button (2) to remove the drawer. Then flush the drawer with water until it is clean and insert the drawer back in the applian ce. 2. Open servi ce flap at the right corner of appliance front. 3. Provide a flat container to catch leach water. There could be bigger amounts! 4.
Care and cleaning 20 Troubleshooting 21 Display code Water inlet valve and inlet valve filter To prevent blockage of water supply by solid substance like lime clean regularly the inlet valve filter. Unplug the power cord and turn off the water supply. Code Auto Lo HALF FULL HI Unscrew the water inlet hose at the back of the appliance as well as on the tap. 1:25 19:30 Remove the filters and flush them with water and a brush.
Troubleshooting 22 In case of power failure Problem The current programme and its setting will be saved. When power supply is restored, operation will be resumed. If a power failure cuts an operating wash programme door opening is mechanically blocked. To get out any laundry water level should not be seen in the glassy porthole of the door. - Danger of burns! Water level has to be lowered as described in “Pump filter”.
24 Technical data Basic technical information regarding the appliance Power source 220-240V/50Hz 10 Max. working current (A) Water pressure (MPa) Nominal load (kg) Max spinning speed (rpm) Washing programmes Max. power (W) Dimensions (HxDxW mm) 0.03 P 1 12 1400 16 2000 845x600x595 Net. weight (kg) 80 Power consumption of the off-mode (W) 0.2 Power consumption of the left-on mode (W) 0.
