Manual

HVBOBOABH manual 8/29/02 8 :37 AM Pag_ I/_
Unpacking Your Wine ¢oo ÷r
1, Remove all packaging material. This includes the foam base and all
adhesive tape holding the wine cooler accessories inside and outside,
Slide out and remove plastic or foam guard used to secure the
compressor from shipping damage due to vibration and shock
2, Inspect and remove any remains of packing, tape or printed
materials before powering on the wine cooler
[÷ve ing Your Wine Ooo ÷r
• Your wine cooler has four leveling legs which are located in the
front and rear corners of your wine cooler After properly placing your
wine cooler in its final position, you can level your wine cooler
• Leveling legs can be adjusted by turning them clockwise to raise your
wine cooler or by turning them counterclockwise to lower
your wine cooler, The wine cooler door will close easier when the
leveling legs are extended
De¢tri¢am Requirement
• Make sure there is a suitable power Outlet (115 volts, 15 amps outlet)
with proper grounding to power the wine cooler.
• Avoid the use of three plug adapters or cutting off the third grounding in
order to accommodate a two plug outlet. This is a dangerous practice
since it provides no effective grounding for the wine cooler and may
result in shock hazard,