20/21 USER MANUAL Please read this manual carefully before using this TV set and keep it for future reference.
CONTENTS Before Operation Warning and cautions..............................................................................2 Installation................................................................................................4 Antenna Connection................................................................................4 Preparation of the remote control............................................................4 Function buttons and External Connections........................................
Important safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE Uninsulated Dangerous Voltage, that may be of sufficient magnitude to constitute a risk of electric shock, is present within the cabinet of this unit. ATTENTION The Owner's Manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual.
Important safety Instructions 10. POWER SOURCES This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions. 11.
Installation Antenna connection Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position may vary. Mixer (not incl.) Antenna/ CATV input 75 standard coaxial type AC power socket Note: * It is recommended that a 75 ohm coaxial antenna is used to avoid interference. *To avoid interference from electrical signals, do not bind the antenna cable together with any mains lead.
Function Buttons and External Connections Front panel the TV set Volume up/ down TV/AV Channel Position up/down Switching Menu Video Iutput terminal Audio Input terminal Signal Receiver Power Switch Power Indicator Rear panel of the TV set Video CB Input terminal Video Y Input terminal Video Output terminal S-VIDEO input terminal Video Input terminal Antenna Input socket Video CR Input terminal Audio Output terminal Audio Input terminal
Using the Remote Control Buttons on the remote control MUTE SCAN SLEEP CALL ZOOM TV/AV SWAP S.STD P.
Remote Features Power Button: To turn power ON or OFF , press power button on remote control. System and Channel Display Button: This will show you the current channel number. System will also be displayed if set. Sleep Timer Button This feature allows you to turn off the television in pre-selected minutes (180.170,160, ........,10 and 0). To cancel, keep pressing button until you exit out. CALL SLEEP TV/AV input Button: This button has five setting A)Video1, B)Video 2,C)DVD,D)TV .
Channel (+/-) Select Button: You can go up and down the channels by pressing CH (+) button and CH (-) button. This button can also be used in adjusting the functions in the Menu Mode. CH+ Menu Select Button: You can select the menu by pressing the MENU button. You can call on the menu (PICTURE, TIME, TUNE andFUNCTION) by pressing the corresponding button on the remote control. VOL- MENU VOL+ CHVolume (+/-) Select Button: You can increase the volume by pressing VOL (+) button and decrease VOL(-) button.
Information to user:This television receiver is equipped with close caption decoder and parental blocking technology as required by the FCC. Menu Functions Video Set Up: Pressing MENU button once will bring the Picture Set Up menu on the TV. The following is shown on your TV screen: Video Picture Brightness Color Sharpness Hue Color Temp. 70 32 50 40 50 Neutral Follow the procedure below to adjust the picture quality of your choice: 1.Press the CH(+) and CH(-) button to go up and down the menu. 2.
Audio Set Up: By pressing MENU button ,and then pressing VOL(-/+) button it will bring you to Audio Set Up display. You will see the following menu on your TV screen: Audio Volume 45 Follow the procedure below to adjust the sound quality: Press VOL (+) button to increase and VOL (-)button to decrease the level to your preference. Timer Set Up: By pressing MENU button ,and then pressing VOL(-/+) button it will bring you to Timer Set Up display.
Function Set Up: By pressing the MENU button, and then pressing VOL-/+ button will bring you to Function Set Up menu. You will see the following menu on your screen: Setup Language Background Black Stretch VNR Fade C. Caption Demo mode English on on on off off Follow the procedure below to select one of the above options: 1.Press the CH(+) and CH(-) button to go up and down the menu. 2.Press the VOL(+) and VOL(-) button to increase and decrease the level to your preference for each item.
Setup Language Background Black stretch VNR Fade C. Caption Demo mode English on on on off off Fade: The FADE control allows for the picture tube to warm up and gently turn on, which can help prolong the life of the picture tube. Demo mode: This will display the main functions of the TV set.
Channel set up: By pressing MENU button ,and then pressing VOL-/+ button it will bring you to Channel Set Up. You will see the following display on TV screen. Channel Channel System Antenna Skip Current Ch. Fine Auto Program Auto TV off 2 Follow the procedure below to select above options: 1.Press the CH(+) and CH(-) button to go up and down the menu. 2.Press VOL (+) button or VOL (-) button to select your preference. Channel System: Press the VOL(-/+) buttons to select the correct channel system.
Calendar: Your TV has been designed with a calendar. By pressing MENU button ,and then pressing VOL-/+ button it will bring you to Calendar. You will see the following display on TV screen. OCT OCT OCT Calendar Solar 2001 11 14 Follow the procedure below to adjust the Calendar : 1. Press the CH +/- buttons to select the year item, the month item or the date item. 2. Press the VOL-/+buttons to change calendar setup (1901.1.1-2099.12.31). 3. Press EXIT button to exit the calendar mode.
V-CHIP Set UP: Press the MENU Button on your remote control to go to Password menu, then input the password (0000). It will bring Parental Lock set up display on the screen. You will see the following menu on your screen: Parental Lock Passsword Password ---- Parental Lock TV Rating MPAA Rating Lock Menu Change Password off This function enables you to block certain TV channels in accordance to the V-CHIP requirement established by the FCC. To set the V-CHIP function: Select the TV Rating option.
When Movie rating is selected, you will see the following rating table on your TV screen. MPAA Rating G U P G U P G - B R U U NC-17 U X U Note: You can press CH(+/-) buttons to go up and down the menu,then press VOL(+) button to select "B"or"U". PARENT LOCK OFF means the lock function is turned off . If the PARENT LOCK is in "OFF" mode then V-CHIP function will not be active to accept the V-CHIP signal. PARENT LOCK ON means the lock function is turned on.
V-Chip Technology: The "V-Chip Technology" allow you to use U.S. And Canada Movies and TV PROGRAMS Guide ratings to block certain types of TV programs and movies. To understand clearly about TV programs rating codes, read the following list: U.S. TV Program Ratings NR: Not Rated-this means that programs are not rated or rating does not apply. TV-Y:For all children-this type of rated programs are designed for a very young audience, including children from ages 2-6.
To understand clearly about movies rating codes, read the following list: U.S. Movies Rating Chart NR: This means movie is not rated yet. It is pending government rating approval. G:General Audience-this type of movie rating means all ages admitted to see the movie. PG-13:Parents Strongly Cautioned - this type of movie rating means some material may not be appropriate for children under13. R:Restricted- This type of movie rating means children under 17 of age requires to be with parent or guardian.
Connecting the TV set to the other video and audio equipment Connecting to the other video and audio equipment You can connect the DVD,VCR and stereo system to the output to enjoy a higher quality of picture and sound effect.
Troubleshooting guide To assist in location possible faults use help guide below. BREAKDOWN PHENOMENON PICTURE SOUND CHECKING The aerial direction and connection Picture with snow Double or Triple Image Noise Normal This is called "ghosting" and can be minimized with an outside aerial, and good quality cable and terminations. Altering the aerial direction can also minimize this effect.
Specifications The specifications offered you here are for reference only. With product improvement there may be some differences between the description and the final product. Specifications HTF21S32 Model Colour system NTSC Sound system M Picture tube 20/21 color picture tube Sound output power 2X2W 10% THD Power requirements AC 110V-240V Power consumption 70W Dimension 22.7inch x 18.7inch x 18.0inch WDH 50/60Hz NOTE Design and specifications are subject to change without notice.
Warranty Information Haier Model number Serial number Date of purchase
HTF21S32 AC 110V-240V~, 50/60Hz
