Ice Maker User Manual

6
English
PRE-OPERATING INSTRUCTIONS
WARNING: 1. Before using your ice maker, it is strongly
recommended to clean it thoroughly, without power.
Clean the water reservoir and ice storage compartment with
diluted vinegar, warm water and a soft cloth. Use water to rinse
the inside parts, and drain out the water from the draining spout
by unplugging the drain cap on the front (under water drip tray).
WARNING: 2. The incline angle of the icemaker cabinet should not exceed 45˚
during transportation or use. Do not turn the icemaker upside-
down.
Doing so could cause the compressor or refrigerating system to operate incorrectly.
When the icemaker is moved or transported, please allow time for the fluids in
the compressor to settle. Before using the icemaker for the first time, please wait 2
hours after the unit has been leveled and positioned in its proper place.
3. Please ensure the icemaker is level and on a stable table or platform for safety
and to avoid malfunction.
4. The machine must be placed on a dry and level surface with sufficient
ventilation, far from heat sources such as ovens, heaters and corrosive gases.
Leave an 8-inch clearance on all sides of the icemaker for proper ventilation.
5. Do not fill the water reservoir with hot water. This may damage the icemaker. It
is best to fill the water reservoir with water of room temperature or lower.
6. We suggest to use distilled, purified or bottled water instead of tap water. The
ice will taste better and will reduce the sediment caused by city tap water.
7. NOTE: This portable icemaker uses a fully automatic control system, with an
advanced microcomputer for easy and convenient ice making. Making ice is
simple and fast. Just add water, plug into an outlet, and press the ON button.
When first turning on the unit or during icemaking cycles, the compressor will
stay idle for 3 minutes, while energizing.
There are warning indicators that alert you when the reservoir is empty and when
the ice storage compartment is full. The icemaker also has built-in safeguards
that can limit accidental damage, automatically shutting down the system when
necessary.