Operation Manual
08
BEFORE USE
OPERATIONAL FUNCTIONS
CONTROL PANEL
A Program knob
B Power Switch
C Start/Pause Button
D Spinning Speed Setting Button
E Washing temperature button
F Delay Button
G Detergent distribution drawer
H Display
E+F: Combination for keyboard lock
A ¬ Program knob _By turning the knob clockwise/counterclockwise, the required program can be selected. There are
11 programs available. After a program is selected, the corresponding light will go on.
B ¬ Power Switch _ Press this button to switch on the washing machine. Press it again to switch it off.
C ¬ Start/Pause
Button
_ When the washing machine is connected to the power socket and a program is selected, lightly
touch this button to start operation. During a wash cycle, touch it lightly ,operation will stop and
the digits on the screen start blinking. Touch it again to resume operation. To cancel a wash program
during a wash cycle, touch this button, when the digits on the screen start blinking, press the Power
switch, the program will be cancelled.
D ¬ Spinning Speed
Setting Button
_ Touch this button lightly to select the desired speed. When a speed is set, it will be displayed on
the screen.
Note: Different water temperatures and spinning speeds can be set for different
laundries. Wash using the default settings if there is no special requirement.
E ¬ Washing
temperature button
_ Touch this button lightly, the washing temperature will be displayed on the
screen. Select a temperature according to the type of laundry.
D
é
part/Pause
Centrifugeren Start/Pauze
Essorage
Temperatuur
Température
IntensifIsi
Coton Mixtet
Lainei
D
é
licatl
Soie
Rapidei
Lavage
Rin
ç
agei
Essorageso e
Vidangei
Katoen Mix Wol Fijne was Zijde Snel
Wassen
Spoelen
Centri
fugeren
Afpompen
Eindtijd
Fin Différée
HNS1460TVE
Intensief
0