Installation Guide

English
8
English
TOOLS AND MATERIALS NEEDED
MOUNTING SPACE
# 1 Phillips screwdriver
Pencil
Ruler or tape measure and
straight edge
Carpenter square
(optional)
Tin snips (for cutting
damper, if required)
Hammer (optional)
Stud nder or
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Gloves
Saw (saber, hole or keyhole)
Level
Duct and masking tape
Scissors
Electric drill with 3⁄16“, 1⁄2“ and 5⁄8“
drill bits
(to cut template, if necessary)
Safety goggles
Backsplash
66ʺ(167.6 cm)
or More from
the Floor to the
Top of the
Microwave
30
“(76.2 cm)
2
“ (5.1 cm)
30
“
(76.2 cm)
min.
16
1
⁄2“ (41.9 cm)
Bottom Edge of
Cabinet Needs to
be 30ʺ(76.2 cm)
or More from the
Cooking Surface
NOTES:
• The space between the cabinets must be 30“ (76.2 cm)wide and free of obstructions.
• If you are going to vent your microwave oven to the outside, see Hood Exhaust
Section for exhaust duct preparation.
• When installing the microwave oven beneath smooth, flat cabinets, be careful to
follow the instructions on the top cabinet template for power cord clearance.