Installation guide

IMPORTANT SAFETY
INSTRUCTIONS
Disconnect electrical power at the fuse box or circuit breaker box
before installing.
The mounting surface must be capable of supporting the cabinet
load, in addition to the added weight of this 63–85 pound (28.5–
38.5 kg) product, plus additional oven loads of up to 50 pounds
(22.7 kg) or a total weight of 113–135 pounds (51.3–61.2 kg).
This product cannot be installed in cabinet arrangements such as an
island or a peninsula. It must be mounted to BOTH a top cabinet AND
a wall.
Use two or more people to move and install microwave oven.
READ AND SAVE THESE
INSTRUCTIONS
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting installation. Read and follow the
instructions provided with any tools listed here.
TOOLS NEEDED
Phillips Screwdriver
Pencil
Tape Measure or Ruler
Carpenter's Square
Tin Snips (for cutting damper, if
required)
Scissors
Cordless Electric Drill
³⁄₁₆", ½" and ⅝" Drill Bits
Reciprocating Saw, Hole Saw or
Keyhole Saw
Stud Finder
Hammer
Carpenter's Level
Duct Tape
Masking Tape
Safety Gloves and Goggles
PARTS SUPPLIED
Wood Screws (¹⁄₄" x 2")
Toggle Bolts and wing
nuts (³⁄₁₆" x 3")
Grease Filters (packed
separately)
3
ENGLISH