Space Saving 120 Volt Electric Vented Tumble Dryer Wall-mountable . Dryer User's Manual HLP140E Please read this manual carefully before using. Retain it for future reference.
UNPACKING DRYER Unpacking Your Dryer 1. Inspect and remove all packing materials. This includes the foam and any adhesive tape both inside and outside of the unit. 2. Inspect and remove any remains of packing, tape or printed materials before powering on the dryer. DANGER Risk of child entrapment. Before you throw away your old dryer, take off the door so that children may not easily get trapped inside. PRODUCT REGISTRATION Than k you for using our Haie r product.
SAFETY INSTRUCTIONS ! WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using the appliance. 2. Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode. 3.
SAFETY INSTRUCTIONS Electrical Requirements Grounding Instructions: This appliance must be grounded. It is equipped with a 3-wire cord having a grounded plug. The plug must be plugged into an outlet which is properly installed and grounded. Warning! Improper use of the grounded wire can result in the risk of electric shock. Consult a qualified electrician if necessary. Do not attempt to defeat this safety feature by modifying the plug.
Table of Contents Unpacking Your Dryer ………………………………………………… 1 Product Registration .………………………………………………...…1 Safety Instructions………………………………………………...…….2 Electrical Requirements …………………………………………….. 3 Parts and Features………………………………………………....……5 Set Up INSTRUCTIONS ………………………………………….……6-8 -Location of Your Dryer ……………………………………………6 -Assemble Dryer for Installation…………………………..……… 7 -Venting the Dryer……………………………………………………8 INSTALLATION INSTRUCTIONS……………………………............
Dryer Parts and Features Windows Drum Door Exhaust and Lint Filters Air Intake Digital Control Panel Door Gasket Front View Status 150 Dry 120 Cooling 90 End Cycle 60 Clean Lint 30 Dry Time A U T O D R Y Normal Heavy High Delicate Low Timed Dry Air-Dry Cycles Power On/Off Start Pause Temp HLP140E Dryer Hanging Wall Hook Hose Clamp Exhaust Housing Power Cord Exhaust Vent Casing Back Cover Spacer Back View 5
SET UP INSTRUCTIONS Tools and Parts Required for Installation: Philips Head Screw Driver Flat Head Screw Driver Electric Drill and 1/8 inch drill bit Stud finder (optional) (6) Wood screws for mounting plywood Plywood board; size 30 (h) by 24(w) inches or wood slats Venting materials: 4 inch diameter metal exhaust rigid ducting and fittings or UL flexible metal dryer vent hose, that should not exceed 6 feet.
SET UP INSTRUCTIONS Assemble Dryer for Installation Screw mounting hook bracket and wall spacer to dryer with screws provided. 1.Attach Hanging hook bracket using the 4 screws. 2.Attach the 2 wall spacers to the bottom of the dryer, using the 2 screws. 3.Attach Exhaust Housing Connect vent housing to dryer using hose clamp provided to the exhaust pipe. Exhaust Pipe Exhaust Vent Housing Hose Clam 4.
SET UP INSTRUCTIONS 5. Venting The Dryer Proper venting of the dryer is very important. Determine the best and safest ducting for the dryer. ! WARNING! Use a metal or UL vent. Do not use plastic ducting. Do not crimp or use excessive ducting. Clean old ducts before installing this dryer. Outside Vent Incorrect Correct Exhaust Requirements and Maintenance. Venting must conform to local building codes. Do not use thin plastic or foil ducting. Use 4 inches (10.
INSTALLATION INSTRUCTIONS Wall Mounting Instructions Location for installation and options for various walls 1.There are 2 mounting options- either using wood slats or a whole plywood board. The dryer installation to the wall should be able to accommodate the weight of the unit of 52 lbs. plus about 10 lbs. for clothing (or approximately 62 lbs). We suggest you use a plywood board for added support and safety, this is the best way to mount. 2.Determine dryer position on the wall.
INSTALLATION INSTRUCTIONS Mounting Plywood to wall 5. For the best installation: Locate the wall studs in order to securely mount the unit on the wall. Use 1 plywood board size 30 (h) by 24(w) inches and mount into the wall studs using (6) wood screws (not provided) Plywood board for supporting the dryer Use wood screws 30 inches 24 inches 6.Mark the required dryer bracket position and holes using the template provided.
INSTALLATION INSTRUCTIONS 8. Putting Dryer on wall. Lift the dryer (with the help of an assistant) and insert the hanging hook onto the 2 mounting brackets on the wall. The wall spacer will distance the dryer from the bottom. Hang dryer onto mounting brackets on the wall 9. Connect ducting to the Dryer Connect the exhaust ducting (not provided) from the dryer venting housing to external outside dryer vent using a hose clamp (not provided). Note Must purchase these parts from local hardware store.
OPERATING INSTRUCTIONS Control Panel Function LED Indicator lights Flashing LED- indicates the program is functioning LED On- indicates function selected or the program, that is going to begin. Status Indicator lights 'PowerOn/Off ' button Dry The dryer is on. Cooling The final drying cycle will be completed soon, and the dryer stoped heating and is cooling down. End Cycle The cycle is completed; take out laundry.
OPERATING INSTRUCTIONS Quick Start Normal , Heavy and Delicate Cycle Laundry Loads 1.Connect AC plug to 120 Volt outlet. 2.Load your dryer with clothing; Note Do not overload the Dryer It is suggested that 2/3 the capacity of drum be filled to allow for tumbling and proper drying.
OPERATING INSTRUCTIONS Quick Start Normal , Heavy and Delicate Cycle Laundry Loads 3. Set Cycle and Start To start drying a laundry load using Auto Dry with presets for Temperature and Time, there are 3 easy steps: Power On/Off 1. Turn ‘Power ON’ 2. Choose drying Cycle – Normal, Heavy or Delicate Cycles Start Pause 3.
OPERATING INSTRUCTIONS Timed Dry Cycle Manual Status 150 Dry 120 90 Cooling End Cycle 60 Clean Filter 30 A U T O Normal Heavy High Delicate Low Timed Dry Air-Dry D R Y Dry Time Cycles 3 2 Power On/Off Start Pause Temp 4 5 1 The Timed Dry Cycle is for manual selecting Dry times and Temperatures. For Timed Dry operation. 1. Turn ‘Power ON’ 2. Choose dry Cycle – Power On/Off 3. Press Dry Time button to manually select drying time in a range of 30, 60,90,120, or 150 minutes. 5.
! CAUTION! The tumble dryer is intended only for drying textile material washed in water. Disconnect this appliance from the power supply before attempting any user maintenance other than cleaning the lint trap. Connect to individual AC power outlet . Do not allow children to play on or in the dryer. Only place damp clothes in your dryer . This dryer is not to be used for clothing or fabrics cleaned by chemicals. Do not allow lint to collect around the dryer or exhaust vents.
Drying Tips and Precautions Delicate clothes especially those with ribbon or lace, should be placed in a nylon mesh bag before drying to prevent tangling. Clothes with zippers Zippers, buckles, buttons and fasteners should be closed or clothing should be turn inside out to reduce the impact of noise between metal and the drum.
Care And Cleaning Guide Clean buildup such as lint on filters after each use, otherwise it will affect the performance of your dryer. Cleaning of Lint trap and Filters The lint filter must be always used for drying. The filter is in the rear It must be cleaned each time before or after each use. of the drum 1. Remove the Exhaust venting casing containing the filters. Use four finger grabbing holes in middle of the exhaust vent casing center to pull from the drum. Remove the filters by pulling straight out.
Troubleshooting Check your problem by using the chart below (If problems occur, please pull out the plug before examining) and try the solutions for your problem. If the dryer still does not work properly, contact Haier customer service center or the nearest authorized service center. Symptom Possible Cuase Possible Remedy Put Power plug in socket. Dryer won't work.
Limited Warranty If you need service, please first see the ‘Troubleshooting’ section of the User Manual. After checking ‘Troubleshooting’, additional help is available by calling Haier America Customer Service Hot Line 24 hoursa day, 7 days a week. Please call 1-877-337-3639.
Limited Warranty Damages from improper installation. Damages incurred during shipping. Defects other than manufacturing. Damage from misuse, abuse, accident, alteration, lack of proper care and maintenance or incorrect current or voltage or acts of G-D. Damage from other than household use. Damage from service by other than an authorized dealer or service center. Decorative trims, glass or replaceable light bulbs. Transportation and shipping costs. Labor (after the initial 12 months).
Mount the Haier Dryer over any of Haier's 6 Portable Washers Both Washer and Dryer Use Standard 120 Volt Outlets: You Can Install Them Anywhere! PLUGS INTO ANY HOUSEHOLD OUTLET • Uses St and ard 120 Volt – 15 amp Out let s • No Special wiring required • Easy Installation Larger Wash Capacity than the HLP140E Dryer Equal Wash Capacity to the HLP140E Dryer HLP20E 0.7 Cu.Ft. HLP21E 0.9 Cu.Ft. HLP23E 1.6 Cu.Ft. XQJ50-31 HLP50E 1.62 Cu.Ft. 2.0 Cu.Ft. XQB60-91BF 2.2 Cu.Ft.
IMPORTANT Do Not Return This Product To The Store If you have a problem with this product, please contact the ‘Haier Customer Satisfaction Center’ at 1-877-337-3639. DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE IMPORTANT Ne pas Réexpédier ce Produit au Magasin Pour tout problème concernant ce produit, veuillez contacter le service des consommateurs ‘Haier Customer Satisfaction Center’ au 1-877-337-3639. UNE PREUVE D’ACHAT DATEE EST REQUISE POUR BENEFICIER DE LA GARANTIE.
