Use and Care Manual

POWER SUPPLY CORD
Wiring Requirements
115 Volt, 60Hz, 15-amp fused grounded 3 prong outlet
The use of a time-delay fuse or time-delay circuit breaker
is recommended.
Use a dedicated circuit only.
NOTE: Do not operate any other electrical
appliances on this circuit or you may trip the circuit
breaker/fuse.
REQUIRED GROUNDING METHOD
This dehumidier must be grounded. The dehumidier is
equipped with a power supply cord that has a 3 prong
grounding plug. The power supply cord must be plugged into
a mating, grounded 3 prong outlet, and grounded in
accordance with all local codes and ordinances.
115V
15 Amp
INSTALLATION INSTRUCTIONS
STEP 1 - UNPACK DEHUMIDIFIER
WARNING
Excessive Weight Hazard
Use two or more people to move and install
dehumidifier.
Failure to do so can result in back or other injury.
Remove packaging materials. Save the carton and the
foam packaging for storing the dehumidier when not in
use.
NOTE: There are no packing materials inside the
dehumidier to remove. Do Not open the cabinet.
Properly dispose of/recycle all packing material.
Handle the dehumidier gently.
Keep the dehumidier upright and level. Do not set the
dehumidier on its side, front, back or upside down.
STEP 2 - INSTALL DIRECT DRAIN
(Optional)
If you plan to operate your
dehumidier continuously, and
you are placing it near a oor drain, such as in a basement,
you may decide to install a direct drain to avoid having to
empty the water collection bucket.
1. Unscrew and remove the drain cover on the back of the
dehumidier.
2. Remove the soft, rubber stopper. Place the drain cover
and stopper into the water bucket for safe keeping.
b
a
A
Rubber
Stopper
B
Drain Cover
3. Connect a drain hose (not provided) to the garden-hose
style drain connection.
A
Drain Hose
4. Lower the drain hose horizontally into a drain.
4
ENGLISH