User Manual

Using your Ceramic Hob a

To start cooking

• After power on, the buzzer beeps once, all the indicators light up for 1 second

then go out, indicating that the ceramic hob has entered the state of standby

mode.

1. Touch the ON/OFF control，all the indicators

show “-” or “- -“, indicating that the ceramic

hob has entered the state of standby mode.

2. Place a suitable pan on the cooking zone that

you wish to use.

• Make sure the bottom of the pan and the surface

Of the cooking zone are clean and dry.

3. Touching the heating zone selection control, and a indicator next to the key will

flash

4.Set a power level by touching the “-”, “+”,

a. If you don’t select a heat zone within 1 minute, the

ceramic hob will automatically switch off. You will need to start again at step

b. You can modify the heat setting at any time during cooking.