LED LCD TV OWNER' S MANUAL M OD EL : L E 3 2 C 4 3 0 Please READ this manual carefully before operating your TV, and retain it for future reference
Contents 1 Safety and warnings..........................................................................................................2-3 2 Introduction.....................................................................................................................4 3 Installation...................................................................................................................... 5-8 4 Remote Controller...........................................................................
SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTION 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, install in accordance with the instructions. 8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
SAFETY AND WARNINGS High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls. To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.
INTRODUCTION Accessories Main features Used as Television, display terminal, PC display Infrared Remote Controller............ 1 High luminance, wide viewing angle Battery(AAA)...............................2 Can store 100 TV programs User s M anual...............................1 HDMI interface 5 AV2 IN/AV OUT cord.....................1 Multi-Media player (USB); Main parameter Viewing Picture Size (Diagonal) Resolution Aspect Ratio TV System 31.
INSTALLATION KEYBOARD Front panel SOURCE MENU 3 CH+ 1 CH- 2 VOL+ VOLSTANDBY 30 1: Remote control sensor. 2: Indicator LED: BLUE 30 POWER ON. RED 3: 1 SOURCE Display the input source menu. 2 MENU D isplay main MENU. 3 CH+/CHIn TV mode press CH+ or CH- to change the channel up and down. In MENU mode, press CH+ or CH- to select items. In standby mode, press CH+ or CH- to turn on the TV. 4 VOL+/VOLAdjust sound level. In MENU mode, press VOL+ or VOL- to adjust the item that you selected. 5.
INSTALLATION ANTENNA Note: Aerial connections:IEC(female). Input impendance:75 unbalanced.
INSTALLATION PC STEPS: 8 Be sure both the TV and computer are Power off. 1.Connect VGA and audio cable 2.Connect power cord 3.Power on the TV, switch to PC mode 4.Power on the PC This sequence is very important. HDMI1 HDMI2 USB VGA AV PC AUDIO AV2 IN/AV OUT L RF R Y Pb Pr AC-INPUT 100-240V~50/60Hz PRESET MODE RESOLUTION V.Freq.(Hz) H.Freq.(KHz) 1 800*600 60 37.88 2 1024*768 60 48.36 3 1360*768 60 47.7 NOTE: PC V.Freq.(Hz) not more than 60Hz.
INSTALLATION AV EQUIPMENT This TV provides two group of AV, one group of YPbPr for convenient connection to VCR, DVD or other video equipment. Please refer to the owner's manual of the equipment to be connected as well. You can use the input terminals on TV set rear as follows.
REMOTE CONTROLLER 1 17 2 18 19 3 20 4 5 21 22 6 23 7 8 24 9 25 10 11 12 26 13 27 14 28 15 29 16 30 Insert Batteries Into the Remote Control 1 2 3 1. Remove the battery cover. 2. Inserting the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit. 3. Mount the battery cover. Replace with new batteries when the TV set begins to show the following symptoms: Operation is unsteady or erratic.
TV OPERATION 1. CHANNEL MENU The first item of the MENU is channel menu ( for TV source only). You can search channels and edit programs here. Press to move, press OK button to confirm, and press to adjust. Delete Delete Press teletext red button, it will shows red delete cursor. Press to choose the program. Press red button again, the program will delete. Rename Rename Move the cursor to the program, press teletext green button to rename the program. Press to choose the character.
TV OPERATION 3. SOUND MENU The third item of the MENU is the SOUND MENU. You can adjust the sound effect here such as treble, bass, balance etc. Press to move, press OK button to confirm, and press to adjust. OSD Language English Restore Factory Default < > OPTION Sound Mode Music Balance Auto Volume EQ < NOTE: Restore factory default will clear all the programs and Reset all the settings to default value. > SOUND 6. APPLICATION MENU The sixth item of the MENU is the APPLICATION MENU.
TV OPERATION Press to select the function icon, press OK button to confirm the function. Press or EXIT button to exit the control bar. NOTE: You can adjust the audio track, subtitle, or program in the Info menu while Playing the video file. Choose the Info icon and press OK can display the Info MENU. 1/1 Return C Sample1.ts Resolution: 720x576 Press the to select the right disk and press OK to display media files and folder list or choose Return to back to the media type selection menu.
TROUBLE SHOOTING Trouble phenomenon Picture Audio Snow Ghost Noise Normal audio Interfere Normal Picture No picture Inspection antenna position, direction or connection antenna position, direction or connection Noise electronic equipment,car/ motorcycle,fluorescent light Mute Volume(inspect wether the mute function on the remote control are started , or audio system are correct or not) Mute Power cord is not inserted Power switch is not opened Contrast and brightness/volume setup Press stan
