LCD TV MODEL LCD-32K40 LCD-32K40A LCD-42K40-HD LCD-42K40A-HD Owner’s Manual LCD-K40.
IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: ● Using cabinets or stands recommended by the manufacturer of the television. ● Only using furniture that can safely support the television. ● Ensuring the television is not overhanging the edge of the supporting furniture.
TO THE OWNER Before operating this LCD TV, read this manual thoroughly and operate the LCD TV properly. This LCD TV provides many convenient features and functions. Operating the LCD TV properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. Do not install the LCD TV near the ventilation duct of air-conditioning equipment. Read all of the instructions given here and retain them for later use. Unplug this LCD TV from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. This LCD TV should be operated only from the type of power source indicated on the marking label.
TABLE FEATURE AND DESIGN........................................6 PREPARATION........................................7 PART NAMES AND FUNCTIONS 7-8 C O N N E C T I N G L C D T V. . . . . . . . . . . . . . . . . . . . . . 9 INSTALLING STAND 9 CONNECTING AC POWER CORD 9 CONNECTING OUTDOOR AERIAL 10 CONNECTING A COMPUTER 10 CONNECTING VIDEO EQUIPMENT 11 BEFORE OPERATION..........................
Feature and Design Picture ● High Definition LCD Panel LCD-32K40/A 1366 x 768 pixel HD LCD Panel with high contrast ratio and wide viewing angle. LCD-42K40/A-HD 1920 x 1080 pixel Full HD LCD Panel makes perfect reproduction of 1080p/1080i HD contents in pixel-to-pixel. This LCD panel also provide high contrast ratio and wide viewing angle.
PREPARATION PART NAMES AND FUNCTIONS FRONT Panel Side Control Indicators INDICATORS Power Indicator ECO Sensor Timer Indicator Infrared Remote Receiver CARE FOR USING LCD TV ● Do not bump or scratch the panel surface as this causes flaws on the surface of the screen. ● There may be some tiny black points and/or blight points on the SCREEN. These points are normal. 7 LCD-K40.
PREPARATION SIDE CONTROLS (Each button on the control panel has the same function with its counterpart on the remote control. ) CHANNEL UP/DOWN (▲▼) buttons -Used to Change channels. -Used to select items on On-Screen Menu. VOLUME (+/-) buttons -Used to adjust the volume. -Used to adjust the value of the selected item on On-Screen Menu. -Used to execute the selected item on On-Screen Menu. INPUT MODE button OK MENU button Open or close the On-Screen Menu.
CONNECTING LCD TV INSTALLING STAND Please according to the following procedure to install stand. 1 2 Be careful of the panel. Suggest to put down the panel side on the cushion or other soft material before installing the stand. To align the corresponding pilot holes and fix the stand by screws. Screws B for LCD-32K40/A: 4 pcs Screws A for LCD-42K40/A-HD: 2 pcs Screws B for LCD-42K40/A-HD: 4 pcs A B B Note: Screws A are just for LCD-42K40/A-HD. 3 Installing of stand is completed.
CONNECTING LCD TV CONNECTING OUTDOOR AERIAL Outdoor Aerial Cable used for connection (This cable is not supplied with this LCD TV.) ● Aerial Cable NOTE: For all aerial circuit problems, please consult your local dealer. Aerial Cable CONNECTING A COMPUTER Cables used for connection (These cables are not supplied with this LCD TV.
CONNECTING LCD TV CONNECTING VIDEO EQUIPMENT Cables used for connection (These cables are not supplied with this LCD TV.) ● Video Cable(RCA X1), S-Video Cable, Audio Cable (RCA X2) : Video 1 or Video 2 ● Video Cable(RCA X3), Audio Cable (RCA X2) : DVD (Component Video) ● Video Cable(RCA X1), Audio Cable (RCA X2) : Monitor Output ● HDMI Cable: HDMI Input NOTE : When connecting the cable, AC Power Cords of both LCD TV and external equipment should be disconnected from AC outlet.
BEFORE OPERATION OPERATION OF REMOTE CONTROL INPUT button POWER ON/OFF button MUTE button INFO button SPORTS button STILL button NUMERIC buttons STEREO/MONO button ECO button TIMER button MENU button DIGIT button BACK button CHANNEL RECALL button POINT ▲/ ▼/◄/►buttons OK button VOLUME ( - ) button CHANNEL UP (▲) button VOLUME ( + ) button Xacti button TXT/TV button RED button CHANNEL DOWN (▼) button PICTURE button SOUND button BLUE button YELLOW button GREEN button BASS button GAME button SU
BEFORE OPERATION OPERATION RANGE 15 15 Point Remote Control toward LCD TV (Infrared Remote Receiver) whenever pressing the buttons. Maximum operating range for Remote Control is about 16.4’ (5m) in front, about 30° to the left or the right, about 15° for up or down. Infrared Remote Receiver 30 30 5m REMOTE CONTROL BATTERIES INSTALLATION 1 Remove the battery compartment cover . 3 Close the battery compartment cover. 2 Insert two size AAA batteries (1.
BEFORE OPERATION ON-SCREEN MENU TV/AV/HDMI MODE MENU LIST Note: ● "CHANNEL" menu doesn't work in AV3(DVD), HDMI mode and PC mode. ● In AV1 and AV2(S-VIDEO) mode, only "COLOUR SYSTEM" in "CHANNEL" menu can be selected. ● "TINT" cannot be selected except for NTSC/ NTSC4.43 system. MAIN MENU (CHANNEL MENU) ● 3D NR will prohibited during 1080p mode. CHANNEL AUTO SEARCH SEMI-AUTO SEARCH MANUAL SEARCH COLOUR SYSTEM AUTO SOUND SYSTEM SKIP CHANNEL SWAP B/G OFF AUTO SEARCHING, PLEASE WAIT… 55.
BEFORE OPERATION ON-SCREEN MENU TV/AV/HDMI MODE MENU LIST Note: ● HDMI4 is only for model LCD-42K40/A-HD. MAIN MENU (CHANNEL MENU) ● "PC ADJUST" is only active in PC mode.
BEFORE OPERATION ON-SCREEN MENU PC MODE MENU LIST MAIN MENU (PICTURE MENU) PICTURE PICTURE MODE STANDARD CONTRAST BRIGHTNESS COLOUR TONE NORMAL COLOUR - R COLOUR - G COLOUR - B : SELECT : ADJUST : EXIT : BACK PICTURE MENU PICTURE PICTURE PICTURE MODE CONTRAST BRIGHTNESS COLOUR TONE STANDARD PICTURE MODE STANDARD NORMAL CONTRAST BRIGHTNESS COLOUR TONE NORMAL COLOUR - R COLOUR - G COLOUR - B COLOUR - R COLOUR - G COLOUR - B : SELECT : ADJUST : BACK : EXIT : SELECT : ADJUST : BACK :
BASIC OPERATION TURNING ON / OFF LCD TV 1 Complete the peripheral connections before turning on LCD TV. (Please refer to "CONNECTING LCD TV".) 2 3 Connect LCD TV's AC Power Cord into an AC outlet. SIDE CONTROLS Press POWER ON/OFF button on Side Controls of LCD TV or on Remote Control to turn it ON. The POWER indicator will light up (green). Press POWER ON/OFF button again to shift it to stand-by status, the POWER indicator will become red.
BASIC OPERATION SELECTING INPUT SOURCE Select mode "TV" , "AV1", "AV2-S", "AV3", "HDMI1", "HDMI2", "HDMI3", "HDMI4", "PC" or "USB" by pressing INPUT button on Remote Control or on Side Controls, you can also press POINT ▲▼ buttons to select different mode. To enter the selected mode, press OK button or POINT ◄► buttons. SIDE CONTROLS INPUT TVTV 1. 2. AV1 3. AV2-S 4. AV3 5. HDMI1 6. HDMI2 7. HDMI3 8. HDMI4 9. PC 0.
BASIC OPERATION INFO Press INFO button on Remote Control to display the status of LCD TV. Press again to remove the display. Channel 11 AUTO D/K MONO REMOTE CONTROL Colour System Sound System Stereo/Mono INFO button VOLUME CONTROL To adjust the volume value desired by pressing VOLUME(+/-) buttons on Remote Control or on Side Control. The volume dialogue box will appear on the screen for a short while. VOLUME(+) button to increase volume, and VOLUME(-) button to decrease volume.
BASIC OPERATION SOUND MODE Select sound level by pressing SOUND button on Remote Control. REMOTE CONTROL STANDARD SOUND button Normal sound state preset on LCD TV. NEWS STANDARD Select this mode for talk programs. MUSIC NEWS Select this mode for music programs. PERSONAL MUSIC Select this mode for user to call out the preset sound adjustment in SOUND menu. PERSONAL PICTURE MODE Select image level by pressing PICTURE button on Remote Control.
BASIC OPERATION WIDE Select screen size among "FULL", "ZOOM", "ZOOM[CAPTIONIN]", "NORMAL" and "NATURAL" by pressing WIDE button on Remote Control. * This function doesn't work in PIP/POP mode. * This function doesn't work in TV/ AV/ DVD/ HDMI/ PC modes when no signal is input. * Only "FULL" mode can be selected when the input mode is "HDMI" or "DVD" and the input signal is 1080i, 720p or 1080p. * "FULL" and "NORMAL" can be selected in PC mode. * Teletext is ONLY operated on Full Picture mode.
BASIC OPERATION SPORTS MODE Select SPORTS mode "OFF", "FOOTBALL", "WINTER SPORTS", "MARINE SPORTS" and "INDOOR SPORTS" by pressing SPORTS button repeatly on Remote Control. REMOTE CONTROL SPORTS button OFF Turn off the sport mode to return to normal picture. FOOTBALL Use to watch football program, golf program or etc. OFF FOOTBALL WINTER SPORTS WINTER SPORTS Use to watch skiing program or etc. MARINE SPORTS Use to watch swimming program, diving program or etc.
BASIC OPERATION GAME MODE Game mode will reduce time lug of LCD-TV to display picture from game console. 1 Press GAME button to display OPTION menu. Press POINT ◄► buttons to select "GAME MODE ON". 2 Press POINT ▲▼ buttons to select GAME INPUT SELECT, then press POINT ◄► buttons to select AV1, AV2(S-VIDEO), AV3(DVD), HDMI1, HDMI2, HDMI3, HDMI4 or PC mode. Press BACK button to return to the previous menu.
BASIC OPERATION PIP/POP OPERATION Using PIP/POP function, you can enjoy a TV program and an image such as HDMI input from a side terminal at the same time. Only the sound on the main picture is heard from the TV speaker or the headphone jack. The sound on the sub-picture cannot be heard. REMOTE CONTROL POP button P-SWAP button PIP button P-INPUT button Note: ● PIP/POP function only work in "FULL" mode. ● PIP/POP will prohibited during 1080p mode, warning message "OUT OF RANGE" will be displayed.
BASIC OPERATION POP ON/OFF 1 Press POP button to display two pictures. The left picture is main picture, the right one is sub picture. 2 During POP mode, press P-SWAP button to switch main and sub picture. The sound on the main picture and the sub picture also changes at the same time. 3 Each time POP button is pressed, the location of sub picture is changed as follows. 4 Press any of POP, BACK or POWER ON/OFF buttons to exit POP mode.
BASIC OPERATION XACTI LINK This is a system control function by which, through an HDMI cable, a control signal is output to electronic devices and the operation of multiple devices is coordinated. The HDMI-CEC function will operate correctly only when the Xacti whose model is VPC-HD1010, VPC-HD2000, VPC-FH1, VPC-TH1 or VPC-WH1 is connected to a SANYO TV that incorporates the HDMI-CEC function. 1 Select HDMI SETTING in SETUP menu. Then press ◄► buttons to enter HDMI SETTING menu.(Figure A.
BASIC OPERATION USB After Flash disk, Mobile Hard Disk or other USB devices are inserted the USB terminal, you can read photos. The USB system only supports JPEG format. Note: ● Do not pull in/out USB device frequently. If you pull out USB device when it is being played, maybe it would result physical deterioration for USB device or LCD TV. ● If USB device cannot be read, please check if it is correctly connected and check your USB.
BASIC OPERATION OPERATION OF REMOTE CONTROL (IN TEXT MODE) POWER ON/OFF button MUTE button TEXT REVEAL button TEXT HOLD button NUMERIC buttons TEXT CANCEL button TEXT INDEX button TEXT SUBCODE button TEXT SIZE button VOLUME (-) button PAGE UP (▲) button VOLUME (+) button PAGE DOWN (▼) button TXT/TV button TEXT RED button TEXT BLUE button TEXT GREEN button TEXT YELLOW button Note: ● In different mode, some buttons have different functions. (For details, please refer to page 12.
BASIC OPERATION TEXT/ TV Press TXT/TV button to select teletext. Press this button again will display: ■ TV mode: TV -> TEXT mode -> MIX mode -> TV ■ AV mode: AV -> TEXT mode -> MIX mode -> AV Note: ■ TEXT mode: TEXT screen is displayed. ■ MIX mode: TV/AV (broadcast image) screen and the contents of TEXT(it superimposed) are displayed simultaneously. ■ CANCEL mode: TEXT/MIX MODE is canceled temporarily and broadcast image is displayed. However, the available key are the same as TEXT mode.
BASIC OPERATION TEXT SIZE Press TEXT SIZE button to enlarge the top half of the text page. Press TEXT SIZE button again to enlarge the bottom half of the text page. Press TEXT SIZE button again to return to the normal size page. Normal -> top half enlargement -> bottom half enlargement -> normal Note: ■ During the top half enlargement or the bottom half enlargement mode, if a page request is performed by [0] - [9] button and the TEXT INDEX button, it will become the normal mode and a page will be requested.
MENU OPERATION (TV/AV/HDMI mode) CHANNEL 1 Press MENU button and the main menu will appear. Whenever MAIN MENU is accessed initially, CHANNEL will be the default selection. 2 3 4 Press POINT ▼ button to enter into CHANNEL menu. Press POINT ▲▼ buttons to select the item desired. Press POINT ◄► buttons to adjust the item. ■ Press BACK button to return to the previous menu. ■ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 36) to exit menu operation.
MENU OPERATION (TV/AV/HDMI mode) MANUAL SEARCH Manual search a channel if it cannot be automatically tuned, such as when the signal is poor. 1 2 3 4 Select channel “15”. Enter into CHANNEL menu, press POINT ▲▼ buttons to select "MANUAL SEARCH". Press POINT ◄► buttons to enter into the MANUAL SEARCH menu. Press POINT ▲▼ buttons to select "SEARCH". Press POINT ◄► buttons to start the channel searching. Press and hold POINT ◄ or POINT ► button to search for required TV station.
MENU OPERATION (TV/AV/HDMI mode) PICTURE 1 2 3 4 Press MENU button and the main menu will appear. Press POINT ◄► buttons to select "PICTURE", and will display PICTURE menu. PICTURE MENU Press POINT ▼ button to enter into PICTURE menu. Press POINT ▲▼ buttons to select the item desired. Press POINT ◄► buttons to adjust the item. ■ Press BACK button to return to the previous menu. ■ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 36) to exit menu operation.
MENU OPERATION (TV/AV/HDMI mode) SOUND 1 Press MENU button and the main menu will appear. Press POINT ◄► buttons to select "SOUND", and will display SOUND menu. 2 3 4 Press POINT ▼ buttons to enter into SOUND menu. Press POINT ▲▼ buttons to select the item desired. Press POINT ◄► buttons to enter the item selected. ■ Press BACK button to return to the previous menu. ■ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 36) to exit menu operation.
MENU OPERATION (TV/AV/HDMI mode) TIMER 1 Press MENU button and the main menu will appear. Press POINT ◄► buttons to select TIMER. 2 3 4 Press POINT ▼ buttons to enter into TIMER menu. TIMER MENU TIMER Press POINT ▲▼ buttons to select the item desired. Press POINT ◄► buttons to enter the item selected. OFF TIMER OFF ON TIMER ON TIMER CH --:-16 ■ Press BACK button to return to the previous menu. ■ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 36) to exit menu operation.
MENU OPERATION (TV/AV/HDMI mode) OSD 1 Press MENU button and the main menu will appear. Press POINT ◄► buttons to select OSD. 2 3 4 Press POINT ▼ buttons to enter into OSD menu. OSD MENU OSD Press POINT ▲▼ buttons to select the item desired. Press POINT ◄► buttons to enter the item selected. ENGLISH LANGUAGE H - POSITION V - POSITION DURATION 5 SEC TRANSPARENCY ■ Press BACK button to return to the previous menu.
MENU OPERATION (TV/AV/HDMI mode) SETUP 1 Press MENU button and the main menu will appear. Press POINT ◄► buttons to select SETUP. 2 3 4 Press POINT ▼ buttons to enter into SETUP menu. Press POINT ▲▼ buttons to select the item desired. Press POINT ◄► buttons to enter the item selected. ■ Press BACK button to return to the previous menu. ■ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 36) to exit menu operation.
MENU OPERATION (TV/AV/HDMI mode) HDMI LINK XACTI LINK: Press POINT ◄► buttons to open link connection for Xacti. XACTI POWER ON: Press POINT ◄► buttons to select "ON", The TV will turn on, but the Xacti will keep the same status. (Note: TV will turn on automatically when the Xacti is turned on.) XACTI POWER OFF: Press POINT ◄► buttons to select "ON", The Xacti will turn off, but the TV will keep the same status. (Note: Xacti will turn off automatically when the TV is turned off.
MENU OPERATION (PC mode) PICTURE 1 2 3 4 Press MENU button and the main menu will appear. Press POINT ◄► buttons to select "PICTURE", and will display PICTURE menu. PICTURE MENU Press POINT ▼ button to enter into PICTURE menu. Press POINT ▲▼ buttons to select the item desired. Press POINT ◄► buttons to adjust the item. ■ Press BACK button to return to the previous menu. ■ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 36) to exit menu operation.
MENU OPERATION (PC mode) SOUND 1 Press MENU button and the main menu will appear. Press POINT ◄► buttons to select "SOUND", and will display SOUND menu. 2 3 4 Press POINT ▼ buttons to enter into SOUND menu. SOUND MENU SOUND STANDARD SOUND MODE Press POINT ▲▼ buttons to select the item desired. Press POINT ◄► buttons to enter the item selected. ■ Press BACK button to return to the previous menu. ■ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 36) to exit menu operation.
MENU OPERATION (PC mode) SETUP 1 Press MENU button and the main menu will appear. Press POINT ◄► buttons to select SETUP. 2 3 4 Press POINT ▼ buttons to enter into SETUP menu. Press POINT ▲▼ buttons to select the item desired. Press POINT ◄► buttons to enter the item selected. ■ Press BACK button to return to the previous menu. ■ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 36) to exit menu operation. Note: For the details, please refer to "SETUP" on pages 37-38.
DEALER MODE DEALER MODE TO DISPLAY DEALER MODE: Press INFO button on remote control while holding MENU button on Side control to display Dealer mode menu. The Dealer Mode has 9 different modes: VOLUME LOCK, TUNING LOCK, START MODE, OSD, RC, AC POWER MODE, START VOLUME LEVEL, MUSIC MODE SETUP and RESET. REMOTE CONTROL POINT ▲/▼/◄/► buttons Take the way of setting VOLUME LOCK for example: 1 2 Press POINT ◄► buttons to select a maximal volume. 3 VOLUME LOCK will be the default selection.
DEALER MODE AC POWER MODE You can set "STAND", "ON" or "LAST" in AC POWER MODE. Use this feature to set TV condition when AC cord plug-in. ● STAND - When AC cord plug-in, LCD TV always STAND-BY. ● ON - When AC cord plug-in, LCD TV always ON. ● LAST - When AC cord plug-in, the LCD TV will depend on last TV condition. (ON or Stand-by) START VOLUME LEVEL You can select "OFF" or "1-100" in START VOLUME LEVEL. Use this feature to set volume bar level position every time TV turned on.
APPENDIX CLEANING LCD TV Be sure to disconnect the AC Power cord from AC outlet before cleaning the LCD TV. Clean your LCD TV as follows: ● Gently wipe the screen and cabinet with dry soft cloth. ● The screen is likely to be damaged if it is not maintained properly. Do not use hard objects like a hard cloth or paper. Do not use solvents or abrasions. CAUTION : Do not use benzene, thinner, or any volatile substances to clean the LCD TV. These chemicals may damage the cabinet finish.
APPENDIX TROUBLE SHOOTING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected LCD TV to your equipment as described in the section "CONNECTING LCD TV" . 2. Check cable connection. Verify that all external equipment and power cords are properly connected. 3. Verify that all power is switched on. 4. If LCD TV still does not produce an image, re-start the external equipment. 5.
APPENDIX TECHNICAL SPECIFICATIONS Model Maximum Visible Range Picture Resolution Definition Voltage Power Consumption Power Management Colour System Sound System Channel Coverage Aerial input impedance Speaker Size Sound speciality Input and Output terminals AV1 Input AV2 Input AV3 HDMI Input PC Input Output Terminals Dimensions (Width x Height x Depth) (Including Stand) Net Weight (Including Stand ) Operating Environment Operating Temperature Operating Humidity Storage Temperature Storage Humidity LCD
APPENDIX CONFIGURATIONS OF VGA TERMINALS VGA IN (D-SUB) TERMINAL Terminal : D-SUB15 PIN Connect video output terminal of LCD TV to this terminal with VGA Cable (not supplied). When connecting Macintosh computer, the MAC Adapter (not supplied) is required. 1 2 3 4 5 6 7 8 Pin Configuration 4 5 10 15 2 3 9 14 8 13 1 7 12 6 11 Red Input Green Input Blue Input Sense 2 Ground (Horiz.sync.) Ground (Red) Ground (Green) Ground (Blue) 9 10 11 12 13 14 15 No Connect Ground (Vert.sync.
APPENDIX When input signal is digital from DVD terminal, refer to the chart below. When input signal is digital from HDMI terminal, refer to the chart below. NO. Frame Frequency Resolution EIA1920×1080i@60 33.750 EIA1920×1080p@60 67.500 60.00HZ EIA1920×1080i@50 28.125 50.00HZ EIA1920×1080p@50 56.250 50.00HZ EIA1280×720p@60 EIA1280×720p@50 45.000 60.00HZ EIA720x480p(w)@60 37.500 31.500 50.00HZ 60.00HZ EIA720x576p(w)@50 31.250 50.00HZ 60.00HZ Audio Freq. Format : HDMITM(V.1.
APPENDIX UNINSTALLING STAND BASE CAUTION IN UNINSTALLING STAND BASE ● Through in uninstalling work, handling with more than two people is recommended. ● When holding (moving or lifting) the LCD Display, hold the display's body. Do not handle the LCD TV by holding the attached accessory parts (speakers), otherwise it may result in damage. ● Before uninstalling, provide a desk (or a part of it) which is strong enough to support the weight of the LCD TV and this stand.
APPENDIX Uninstalling Stand Base Note: For model LCD-42K40/A-HD, release screw in 6 holes with screw driver. 3 Pull the stand base out from the cabinet after all screws already removed. 50 LCD-K40.
APPENDIX Uninstalling Stand Base 4 Cover the holes where you remove the stand base from the dust etc. by paste the deck label (supplied) to these holes. 1pcs (Model LCD-32K40/A) or 1pcs (Model LCD-42K40/A-HD) 5 Uninstalling the stand base is completed now. 51 LCD-K40.
Part No. 1AA6P1P5823-- N7TK (UE6-A) LCD-K40.indd 52 SANYO Electric Co., Ltd.
