GB Safety Is Very Important GB Close-up View (Interior) the section entitled, "Troubleshooting". If you cannot solve the problem, contact a authorised service centre. - Only specialised personnel are authorised to make repairs. - Appliances which are no longer being used must be made inoperable by cutting the power supply cord and removing the door lock.
Detergent and Rinse Aid GB Loading the Dishwasher Detergent Rinse Aid Detergent specifically intended for use with dishwashers must This product makes dishes sparkle and helps them to dry with- be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Wash Cycle out spotting. The dispenser is located on the inside panel of the door and should be filled after every 80 wash cycle (or when the Table".
Turning on the Appliance GB Starting a wash cycle Energy Saving Tips GB - Use the right amount of detergent: if you use too much detergent, - It is important to try and run the dishwasher when it is fully Wait a few minutes before unloading the dishwasher to avoid - Make sure that the plug for the appliance is inserted into the wall socket. handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better.
Wash Cycle Table Cycle GB Eco Fast Button Button Cycle Selection Information Description of Cycle Deter- Rinse Aid gent Pre-wash with cold water. Heavy Very dirty dishes, pots and Rinse with cold water. pans (not to be used with Extended wash at 60 K Very dirty dishes, pots and Rinse with hot waterK delicate items). Heavy 30g pans. (not to be used with delicate items) Drying. Pre-wash with cold water.
Installation GB Positioning the Appliance Installation GB The connection must be made to the hot water line following the same procedures as those for the connection to the cold water Position the appliance in the desired location. The back should line. rest against the wall behind it, and the sides, along the adjacent cabinets or wall.
