Installation DW12-EBM Domestic Dishwasher DW12-EBM Diagram MR Power switch Wiring box 3(1) IG Water level switch Door switch 1(2) L LS N 1 Power indicator IS P1 2 F 3 2(1) T50? * 220-240V~ 50HZ 4(2) Filter 4A 4B CL L 4 3B 3A n.c.
Safety Is a Good Habit to Get Into Close-up View (Interior) NOTICE * If the appliance is not operating properly or,maintenance must Carefully read the instructions contained in this manual,as they provide importion which is essential to safe and proper installation, be performed,disconnect he appliance from the power supply. - Keep detergents out of the reach of children,who must also be use and maintenace of the appliance. kept away from the dishwasher when it is open.
Detergent and Rinse Aid S a l t Salt Detergent Rinse Aid The dishwasher is designed to allow for adjusting the amount of Detergent specifically intended for use with dishwashers must be used.The dispenser must be refilled before the start of each salt consumed based on the hardness of the water used.This is intened to optimize and customize the level of salt consumption This product makes dishes sparkle and helps them to dry without spotting.
Turning on the Appliance Loading the Dishwasher Before placing the dishes in the dishwasher, remove the large food Starting a wash cycle particle to the prevent the filter from becoming clogged,which results in reduced performance. - Make sure that the plug for the appliance is inserted into the wall Wait a few minutes before unloading the dishwasher to avoid socket. - Make sure that the water supply is turned on to full pressure.
Wash Cycle Table Energy Saving Tips - It is important to try and run the dishwasher when it is fully - Use the right amount of detergent: if you use too much detergent, the result will not be cleaner dishes,but,rather,a greater nega tive impact on the enviroment. loaded to save on enery.In order to prevent odors from forming and food from caking onto the dishes,you can run the hold cycle.
Installation Cleaning and Special Maintenance Filter Assembly Positioning the Appliance Hot Water Connection For best performance and results, the filter assembly must be Positioning the appliance in the desired location. The back should The water supply to the appliance can also be connected to the cleaned. The filter efficiently removes food particles from the wash water, rest against the wall behind it, and the sides, along the adjacent cabinets or wall.
