Use and Care Manual

10
3. Raise the front leveling legs until the anti-tip bracket is ush with the underside
of the countertop.
4. Install dual-drawer refrigerator to countertop.
METHOD 2 - INSTALL TO ADJACENT CABINETS
Attach Anti-Tip Brackets
1. Pry hole covers from the top of the cabinet to reveal the holes used to install the
anti-tip brackets.
2. Open the upper drawer and leave it open to install the anti-tip brackets.
3. Remove the anti-tip brackets and screws from the accessory bag.
4. With the screws provided, fasten an anti-tip bracket to each side of the top of
the cabinet
Level the dual-drawer refrigerator
Adjustment of the leveling legs under the dual-drawer may be necessary for a
proper t in the cabinet opening.
1. Adjust the height of the rear of the dual-drawer by raising or lowering the rear
leveling legs, and then begin to slide the dual-drawer into the under counter
opening.
2. Adjust the front of the dual-drawer, by raising or lowering the leveling legs, until
it ts under the countertop.
3. Install dual-drawer refrigerator to cabinets.
DUAL-DRAWER USE
CONTROL PANEL
abc d e f
a Temperature Up
b LED Screen
c Temperature Down
d Control Lock/Set
e °C/°F Conversion
f Power Switch