Use and Care Manual

7
49-60810-1
ENGLISH
INSTALLATION REQUIREMENTS
IMPORTANT: This dual-drawer refrigerator is designed for built-in use
only. Before use, this dual-drawer refrigerator must be installed properly.
NOTE: Allow the dual drawer to sit upright on its base for at least one hour
before installation.
• Do not install the dual-drawer refrigerator where the temperature will
go below 55°F (13°C) because it will not run often enough to maintain
proper temperatures.
• Do not install the dual-drawer refrigerator where the temperature will
go above 110°F (43°C) because it will not perform properly.
• Install it on a floor strong enough to support it fully loaded.
• Do not install the dual-drawer refrigerator in a location exposed to
water (rain, etc.) or direct sunlight.
TOOLS NEEDED
¿ Phillips Screwdriver
¿ Measuring Tape
¿ Carpenter’s Level
PARTS SUPPLIED
¿ Anti-tip Brackets
¿ Screws
LOCATION REQUIREMENTS
DUAL-DRAWER REFRIGERATOR DIMENSIONS
"#s
(60.6 cm)
##s
(86.0 cm)
"#c
(60.3 cm)
$!E\5:
(105.2 cm)
WARNING
EXPLOSION HAZARD and FIRE HAZARD
Keep flammable materials and vapors, such as gasoline, away from
appliance.
Failure to do so can result in death, explosion or fire.